This is a library for the Adafruit BME280 Humidity, Barometric Pressure + Temp sensor
Designed specifically to work with the Adafruit BME280 Breakout
These sensors use I2C or SPI to communicate, up to 4 pins are required to interface
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Check out the links above for our tutorials and wiring diagrams
Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, all text above must be included in any redistribution
To download. click the DOWNLOAD ZIP button, rename the uncompressed folder Adafruit_BME280. Check that the Adafruit_BME280 folder contains Adafruit_BME280.cpp and Adafruit_BME280.h
Place the Adafruit_BME280 library folder your arduinosketchfolder/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.
We also have a great tutorial on Arduino library installation at: http://learn.adafruit.com/adafruit-all-about-arduino-libraries-install-use
Compatibility
MCU | Tested Works | Doesn't Work | Not Tested | Notes |
---|---|---|---|---|
Atmega328 @ 16MHz | X | |||
Atmega328 @ 12MHz | X | |||
Atmega32u4 @ 16MHz | X | Use SDA/SCL on pins D2 & D3 | ||
Atmega32u4 @ 8MHz | X | Use SDA/SCL on pins D2 & D3 | ||
ESP8266 | X | SDA/SCL default to pins 4 & 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL) | ||
Atmega2560 @ 16MHz | X | Use SDA/SCL on pins 20 & 21 | ||
ATSAM3X8E | X | Use SDA/SCL on pins 20 & 21 | ||
ATSAM21D | X | |||
ATtiny85 @ 16MHz | X | |||
ATtiny85 @ 8MHz | X | |||
Intel Curie @ 32MHz | X | |||
STM32F2 | X |
- ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
- ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
- ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
- ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
- ESP8266 : Adafruit Huzzah
- ATmega2560 @ 16MHz : Arduino Mega
- ATSAM3X8E : Arduino Due
- ATSAM21D : Arduino Zero, M0 Pro
- ATtiny85 @ 16MHz : Adafruit Trinket 5V
- ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V