T430-EFI

Hackintosh High Sierra for Lenovo Thinkpad T430
Using Intel HD 4000 Graphics on i7-3520m, 250gb SSD, 1600x900 Screen
Works: (sleep, volume, fn+brightness keys, iMessage, Camera)
Doesn't Work: Integrated Microphone
USB wifi required, install necessary drivers for your USB

USB Preparation (8 GB+)

Open disk utility, select USB
Erase, Select MacOS Extended Journaled, GUID partition
Download High Sierra Installer, Through App Store or DosDude1's High Sierra Patcher (Sometimes store will download a useless 29 mb installer)
DOSDUDE1 LINK: https://drive.google.com/file/d/1W992CqAjQa0A1gmWubnUeUarb4B4Jo-w/view
Open Terminal: sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --nointeraction --volume /Volumes/[YOUR USB]

Clover Custom Install Options

MAKE SURE TO SELECT YOUR USB WHEN SELECTING LOCATION
Install Clover in the ESP
Boot Sectors
-> Install Boot0af in MBR
Clover for BIOS (legacy) booting
-> Clover EFI 64-bits SATA
BIOS Drivers, 64 bit
-> FSInject-64
-> SMCHelper-64
-> XhciDxe-64
-> ApfsDriverLoader-64
UEFI Drivers
-> EmuVariableUefi-64
-> OsxFatBinaryDrv-64
Install RC scripts on target volume

Insert EFI folder

Once Finished, there should be an EFI partition on your desktop
If not:

diskutil list
Find EFI for your usb
sudo diskutil mount /dev/diskXsX
EFI will be in Finder or on Desktop

If/When there is:

Move contents of EFI folder (from this repo in EFI.zip) into this partition

Install through USB

Plug in USB, Boot T430, hit F12 on startup
In boot menu, boot from your USB
In Clover, navigate with arrow keys to the Options, hit enter on boot options, type -v, hit enter again, return
Boot the USB
Once prompted, open disk utility, format drive as APFS w/ GUID if using an SSD, macOS Extended Journaled w/ GUID if using a HDD
Takes a while, once done, close with the red button, install MacOS to your target drive
Once done, screen will probably go black & reboot 3/4 through installer, its done installing
Boot the USB, in clover, select your target drive

Install Clover on Your Target Drive

This is so you no longer need to boot with USB
Get clover installer pkg onto your computer, I did this through USB or ethernet
Install with the same options as the USB, this time to our target drive
Follow "Insert EFI folder" but with the target drive instead of the USB