[LeetCode] 720. Longest Word in Dictionary
grandyang opened this issue · comments
Given a list of strings words
representing an English Dictionary, find the longest word in words
that can be built one character at a time by other words in words
. If there is more than one possible answer, return the longest word with the smallest lexicographical order.
If there is no answer, return the empty string.
Example 1:
Input:
words = ["w","wo","wor","worl", "world"]
Output: "world"
Explanation:
The word "world" can be built one character at a time by "w", "wo", "wor", and "worl".
Example 2:
Input:
words = ["a", "banana", "app", "appl", "ap", "apply", "apple"]
Output: "apple"
Explanation:
Both "apply" and "apple" can be built from other words in the dictionary. However, "apple" is lexicographically smaller than "apply".
Note:
- All the strings in the input will only contain lowercase letters.
- The length of
words
will be in the range[1, 1000]
. - The length of
words[i]
will be in the range[1, 30]
.
这道题给了我们一个字典,是个字符串数组,然后问我们从单个字符开始拼,最长能组成啥单词,注意中间生成的字符串也要在字典中存在,而且当组成的单词长度相等时,返回字母顺序小的那个。好,看到这么多前缀一样多字符串,是不是很容易想到用前缀树来做,其实我们并不需要真正的建立前缀树结点,可以借鉴查找的**来做。那么为了快速的查找某个单词是否在字典中存在,我们将所有单词放到哈希集合中,在查找的时候,可以采用BFS或者DFS都行。先来看BFS的做法,使用一个queue来辅助,我们先把所有长度为1的单词找出排入queue中,当作种子选手,然后我们进行循环,每次从队首取一个元素出来,如果其长度大于我们维护的最大值mxLen,则更新mxLen和结果res,如果正好相等,也要更新结果res,取字母顺序小的那个。然后我们试着增加长度,做法就是遍历26个字母,将每个字母都加到单词后面,然后看是否在字典中存在,存在的话,就加入queue中等待下一次遍历,完了以后记得要恢复状态,参见代码如下:
解法一:
class Solution {
public:
string longestWord(vector<string>& words) {
string res = "";
int mxLen = 0;
unordered_set<string> s(words.begin(), words.end());
queue<string> q;
for (string word : words) {
if (word.size() == 1) q.push(word);
}
while (!q.empty()) {
string t = q.front(); q.pop();
if (t.size() > mxLen) {
mxLen = t.size();
res = t;
} else if (t.size() == mxLen) {
res = min(res, t);
}
for (char c = 'a'; c <= 'z'; ++c) {
t.push_back(c);
if (s.count(t)) q.push(t);
t.pop_back();
}
}
return res;
}
};
下面来看递归的解法,前面都一样,不同在于直接对长度为1的单词调用递归函数,在递归中,还是先判断单词和mxLen关系来更新结果res,然后就是遍历所有字符,加到单词后面,如果在集合中存在,调用递归函数,结束后恢复状态,参见代码如下:
解法二:
class Solution {
public:
string longestWord(vector<string>& words) {
string res = "";
int mxLen = 0;
unordered_set<string> s(words.begin(), words.end());for (string word : words) {
if (word.size() == 1) helper(s, word, mxLen, res);
}
return res;
}
void helper(unordered_set<string>& s, string word, int& mxLen, string& res) {
if (word.size() > mxLen) {
mxLen = word.size();
res = word;
} else if (word.size() == mxLen) {
res = min(res, word);
}
for (char c = 'a'; c <= 'z'; ++c) {
word.push_back(c);
if (s.count(word)) helper(s, word, mxLen, res);
word.pop_back();
}
}
};
下面这种解法是论坛上的高分解法,其实我们只要给数组排个序,就可以使用贪婪算法来做了,并不需要什么DFS或BFS这么复杂。首先建立一个空的哈希set,然后我们直接遍历排序后的字典,对于当前的单词,如果当前单词长度为1,或者该单词去掉最后一个字母后在集合中存在,这也不难理解,长度为1,说明是起始单词,不需要的多余的判断,否则的话就要判断其去掉最后一个字母后的单词是否在集合中存在,存在的话,才说明其中间单词都存在,因为此时是从短单词向长单词遍历,只要符合要求的才会加入集合,所以一旦其去掉尾字母的单词存在的话,那么其之前所有的中间情况都会在集合中存在。我们更新结果res时,要判断当前单词长度是否大于结果res的长度,因为排序过后,默认先更新的字母顺序小的单词,所有只有当当前单词长度大,才更新结果res,之后别忘了把当前单词加入集合中,参见代码如下:
解法三:
class Solution {
public:
string longestWord(vector<string>& words) {
string res = "";
unordered_set<string> s;
sort(words.begin(), words.end());
for (string word : words) {
if (word.size() == 1 || s.count(word.substr(0, word.size() - 1))) {
res = (word.size() > res.size()) ? word : res;
s.insert(word);
}
}
return res;
}
};
类似题目:
Longest Word in Dictionary through Deleting
参考资料:
https://discuss.leetcode.com/topic/109643/java-c-clean-code