How to export .netlist file and svg or HTML. please provide one example.
dev-techshlok opened this issue · comments
Hello
I tried examples but unable to generate a netlist.
Also is ti posible to genrate netlist for Kicad or eagle.
please provide one example
I recommend just going to the pcbdl folder and running make examples/servo_micro.html
(with the netlistsvg caveat below).
Type make
for more examples/instructions, especially if you have your own schematics file:
amstan@amstan-glaptop:~/Projects/pcbdl (master)% make
This makefile could be used for automating pcbdl exporting:
make yourcircuit.html
make yourcircuit.svg
make yourcircuit.allegro_third_party/
make yourcircuit.shell
yourcircuit could be stored anywhere, could be an absolute path.
If the circuit is outside the pcbdl folder (suggested), make needs a -f flag to point it back to this file:
make -f /path/to/pcbdl/Makefile /another/path/to/yourcircuit.html
I tried examples but unable to generate a netlist.
Depends on why you're unable.
If you got the following error:
internal/modules/cjs/loader.js:638
throw err;
^
Error: Cannot find module '/home/amstan/netlistsvg/bin/netlistsvg.js'
I expect you need to install netlistsvg (your bug prompted me to publish those instructions).
Also is ti posible to genrate netlist for Kicad or eagle.
I don't have that implemented yet.
There's a bug open for Kicad netlist output module.
Patches welcome!