GianniSchicchi / jazzy

Soulful docs for Swift & Objective-C

Home Page:https://realm.io

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

jazzy

Build Status

jazzy is a command-line utility that generates documentation for Swift or Objective-C

About

Both Swift and Objective-C projects are supported.

Objective-C support was recently added, so please report any issues you find.

Instead of parsing your source files, jazzy hooks into Clang and SourceKit to use the AST representation of your code and its comments for more accurate results. The output matches the look and feel of Apple’s official reference documentation, post WWDC 2014.

Screenshot

This project adheres to the Contributor Covenant Code of Conduct. By participating, you are expected to uphold this code. Please report unacceptable behavior to info@realm.io.

Requirements

  • A version of Xcode capable of building the project you wish to document. It must be installed in a location indexed by Spotlight for the --swift-version configuration option to succeed.

Installation

[sudo] gem install jazzy

See Installation Problems for solutions to some common problems.

Usage

Run jazzy from your command line. Run jazzy -h for a list of additional options.

If your Swift module is the first thing to build, and it builds fine when running xcodebuild without any arguments from the root of your project, then just running jazzy (without any arguments) from the root of your project should succeed too!

You can set options for your project’s documentation in a configuration file, .jazzy.yaml by default. For a detailed explanation and an exhaustive list of all available options, run jazzy --help config.

Supported keywords

Swift documentation is written in markdown and supports a number of special keywords. For a complete list and examples, see Erica Sadun's post on Swift header documentation in Xcode 7, her book on Swift Documentation Markup, and the Xcode Markup Formatting Reference.

For Objective-C documentation the same keywords are supported, but note that the format is slightly different. In Swift you would write - returns:, but in Objective-C you write @return. See Apple's HeaderDoc User Guide for more details. Note: jazzy currently does not support all Objective-C keywords listed in this document, only @param, @return, @warning, @see, and @note.

Jazzy can also generate cross-references within your documentation. A symbol name in backticks generates a link, for example:

  • `MyClass` - a link to documentation for MyClass.
  • `MyClass.method(param1:)` - a link to documentation for that method.
  • `MyClass.method(...)` - shortcut syntax for the same thing.
  • `method(...)` - shortcut syntax to link to method from the documentation of another method or property in the same class.
  • `[MyClass method1]` - a link to an Objective-C method.
  • `-[MyClass method2:param1]` - a link to another Objective-C method.

Swift

Swift documentation is generated by default.

Example

This is how Realm Swift docs are generated:

jazzy \
  --clean \
  --author Realm \
  --author_url https://realm.io \
  --github_url https://github.com/realm/realm-cocoa \
  --github-file-prefix https://github.com/realm/realm-cocoa/tree/v0.96.2 \
  --module-version 0.96.2 \
  --xcodebuild-arguments -scheme,RealmSwift \
  --module RealmSwift \
  --root-url https://realm.io/docs/swift/0.96.2/api/ \
  --output docs/swift_output \
  --theme docs/themes

Objective-C

To generate documentation for Objective-C headers, you must pass the following parameters to jazzy:

  • --objc
  • --umbrella-header ...
  • --framework-root ...
  • --sdk [iphone|watch|appletv][os|simulator]|macosx (optional, default value of macosx)
  • --hide-declarations [objc|swift] (optional, hides the selected language declarations)
Example

This is how Realm Objective-C docs are generated:

jazzy \
  --objc \
  --clean \
  --author Realm \
  --author_url https://realm.io \
  --github_url https://github.com/realm/realm-cocoa \
  --github-file-prefix https://github.com/realm/realm-cocoa/tree/v2.2.0 \
  --module-version 2.2.0 \
  --xcodebuild-arguments --objc,Realm/Realm.h,--,-x,objective-c,-isysroot,$(xcrun --show-sdk-path),-I,$(pwd) \
  --module Realm \
  --root-url https://realm.io/docs/objc/2.2.0/api/ \
  --output docs/objc_output \
  --head "$(cat docs/custom_head.html)"

This is how the AFNetworking docs are generated:

jazzy \
  --objc \
  --author AFNetworking \
  --author_url http://afnetworking.com \
  --github_url https://github.com/AFNetworking/AFNetworking \
  --github-file-prefix https://github.com/AFNetworking/AFNetworking/tree/2.6.2 \
  --module-version 2.6.2 \
  --umbrella-header AFNetworking/AFNetworking.h \
  --framework-root . \
  --module AFNetworking

Themes

Three themes are provided with jazzy: apple (default), fullwidth and jony.

You can specify which theme to use by passing in the --theme option. You can also provide your own custom theme by passing in the path to your theme directory.

Guides

Description Command
Command line option --documentation={file pattern}
Example --documentation=Docs/*.md
jazzy.yaml example documentation: Docs/*.md

By default, jazzy looks for one of README.md, README.markdown, README.mdown or README (in that order) in the directory from where it runs to render the index page at the root of the docs output directory. Using the --documentation option, extra markdown files can be integrated into the generated docs and sidebar navigation.

Any files found matching the file pattern will be parsed and included as a document with the type 'Guide' when generated. If the files are not included using the custom_categories config option, they will be grouped under 'Other Guides' in the sidebar navigation.

There are a few limitations:

  • File names must be unique from source files.
  • Readme should be specified separately using the readme option.

Section description abstracts

Description Command
Command line option --abstract={file pattern}
Example --abstract=Docs/Sections/*.md
jazzy.yaml example abstract: Docs/Sections/*.md

Using the --abstract options, extra markdown can be included after the heading of section overview pages. Think of it as a template include.

The list of files matching the pattern is compared against the list of sections generated and if a match is found, it's contents will be included in that section before listing source output.

Unlike the --documentation option, these files are not included in navigation and if a file does not match a section title, it is not included at all.

This is very helpful when using custom_categories for grouping types and including relevant documentation in those sections.

For an example of a project using both --documentation and --abstract see: https://reswift.github.io/ReSwift/

Controlling what is documented

In Swift mode, Jazzy by default documents only public and open declarations. To include declarations with a lower access level, set the --min-acl flag to internal, fileprivate, or private.

In Objective-C mode, Jazzy documents all declarations found in the --umbrella-header header file and any other header files included by it.

You can control exactly which declarations should be documented using --exclude, --include, or :nodoc:.

The --include and --exclude flags list source files that should be included/excluded respectively in the documentation. Entries in the list can be absolute pathnames beginning with / or relative pathnames. Relative pathnames are interpreted relative to the directory from where you run jazzy or, if the flags are set in the config file, relative to the directory containing the config file. Entries in the list can match multiple files using * to match any number of characters including /. For example:

  • jazzy --include=/Users/fred/project/Sources/Secret.swift -- include a specific file
  • jazzy --exclude=/*/Internal* -- exclude all files with names that begin with Internal and any files under any directory with a name beginning Internal.
  • jazzy --exclude=Impl1/*,Impl2/* -- exclude all files under the directories Impl1 and Impl2 found in the current directory.

Note that the --include option is applied before the --exclude option. For example:

  • jazzy --include=/*/Internal* --exclude=Impl1/*,Impl2/* -- include all files with names that begin with Internal and any files under any directory with a name beginning Internal, except for those under the directories Impl1 and Impl2 found in the current directory

Declarations with a documentation comment containing :nodoc: are excluded from the documentation.

Choosing the Swift language version

Jazzy normally uses the Swift compiler from the Xcode currently configured by xcode-select. Use the --swift-version flag to compile with a different Xcode.

The value you pass to --swift-version must be the Swift language version given by swift --version in the Xcode you want to use.

For example to use Xcode 9.4:

jazzy --swift-version 4.1.2

Troubleshooting

Swift

Only extensions are listed in the documentation?

Check the --min-acl setting -- see above.

Unable to find an Xcode with swift version X

  1. The value passed with --swift-version must exactly match the version number from swiftc --version. For example Xcode 10.1 needs --swift-version 4.2.1. See the flag documentation.
  2. The Xcode you want to use must be in the Spotlight index. You can check this using mdfind 'kMDItemCFBundleIdentifier == com.apple.dt.Xcode'. Some users have reported this issue being fixed by a reboot; mdutil -E may also help. If none of these work then you can set the DEVELOPER_DIR environment variable to point to the Xcode you want before running Jazzy without the --swift-version flag.

Installation Problems

Can't find header files / clang

Some of the Ruby gems that Jazzy depends on have native C extensions. This means you need the Xcode command-line developer tools installed to build them: run xcode-select --install to install the tools.

/Applications/Xcode: No such file or directory

The path of your active Xcode installation must not contain spaces. So /Applications/Xcode.app/ is fine, /Applications/Xcode-10.2.app/ is fine, but /Applications/Xcode 10.2.app/ is not. This restriction applies only when installing Jazzy, not running it.

Development

Please review jazzy's contributing guidelines when submitting pull requests.

jazzy is composed of two parts:

  1. The parser, SourceKitten (written in Swift)
  2. The site generator (written in ruby)

To build and run jazzy from source:

  1. Install bundler.
  2. Run bundle install from the root of this repo.
  3. Run jazzy from source by running bin/jazzy.

Instructions to build SourceKitten from source can be found at SourceKitten's GitHub repository.

Design Goals

  • Generate source code docs matching Apple's official reference documentation
  • Support for standard Objective-C and Swift documentation comment syntax
  • Leverage modern HTML templating (Mustache)
  • Leverage the power and accuracy of the Clang AST and SourceKit
  • Support for Dash docsets
  • Support Swift and Objective-C (mixed projects are a work in progress)

License

This project is released under the MIT license.

About

Jazzy is maintained and funded by Realm Inc. The names and logos for Realm are trademarks of Realm Inc.

We ❤️ open source software! See our other open source projects, read our blog or say hi on twitter (@realm).

About

Soulful docs for Swift & Objective-C

https://realm.io

License:MIT License


Languages

Language:Ruby 48.5%Language:JavaScript 29.0%Language:CSS 14.5%Language:HTML 8.0%