16 UPs does not activate Variant Mode
savenelson opened this issue · comments
Hi,
I have the larger Bekant and have followed these steps:
- w/ original controller, calibrated the legs,
- installed megadesk controller, powered on (4 beeps)
- 16 UPs and no sounds - tried 20 UPs (no beeps though).
- Unplugged controller, unplugged desk, plugged in desk, plugged in the controller (4 beeps).
- 16 UPs (no beeps)
- unplugged desk, held DOWN while plugging in, to reset EEPROM (no beeps)
- unplugged desk and plugged back in (4 beeps)
Notes:
Key is in, and functions with bekant controller.
Hearing the handshake tones, and have 10x restarts w/wo having controller plugged in
I'm not sure what step to try next - I've done the above cycle a few times and cannot activate variant mode to account for my larger Bekant.
Thank!
Hello!
So I checked your order and it was the last one before the new firmware... it is possible you may have gotten the new firmware, which auto-adjusts for the variant.
Can I get the build date on your unit? Should be on a sticker on the back side of your controller like those found in #46
Hi Greg,
It's 2020-37
I can't seem to get any response out of the controller, besides the first 4 beeps.
Fixed!