Overview

Suds is a lightweight SOAP-based web service client for Python licensed under LGPL (see the LICENSE.txt file included in the distribution).

This is hopefully just a temporary fork of the original suds Python library project created because the original project development seems to have stalled. Should be reintegrated back into the original project if it ever gets revived again.

Forked project information

Project site - https://github.com/suds-community/suds
Official releases can be downloaded from:
- Github - https://github.com/suds-community/suds
- PyPI - http://pypi.python.org/pypi/suds-community

Original suds Python library development project information

For development notes see the HACKING.rst document included in the distribution.

Installation

Standard Python installation.

Here are the basic instructions for 3 different installation methods:

Using pip
- Have the pip package installed.
- Run pip install suds-community.
Using easy-install
- Have the setuptools package installed.
- Run easy_install suds-community.
From sources
- Unpack the source package somewhere.
- Run python setup.py install from the source distribution's top level folder.

Installation troubleshooting

Released prior to 0.7 have many known installation issues requiring the target Python environment to be manually prepared when using some ancient Python versions, e.g. 2.4, 2.5 or 3.1.
Releases 0.4.1. jurko 5 < x <= 0.6 may not be installed using pip into a Python environment with an already installed setuptools package older than the version expected by our project. Displayed error message includes instructions on how to manually upgrade the installed setuptools package before rerunning our installation.
- pip internally imports existing setuptools packages before running our setup, thus preventing us from upgrading the existing setuptools installation inplace.
If automated setuptools Python package installation fails (used in releases 0.4.1 jurko 5 and later), e.g. due to PyPI web site not being available, user might need to install it manually and then rerun the installation.
Releases prior to 0.4.1. jurko 5 will fail if the distribute Python package is not already installed on the system.
Python 2.4.3 on Windows has problems using automated setuptools Python package downloads via the HTTPS protocol, and therefore does not work correctly with PyPI which uses HTTPS links to all of its packages. The same does not occur when using Python version 2.4.4.

Features

Basic features:

No class generation
Provides an object-like API.
Reads wsdl at runtime for encoding/decoding
Provides for the following SOAP (style) binding/encoding:
Document/Literal
RPC/Literal
RPC/Encoded (section 5)

The goal of suds is to present an RPC-like interface into soap-based web services. This means that in most cases, users do not need to be concerned with the complexities of the WSDL and referenced schemas. Regardless of which soap message style is specified, the signature of the service methods remain the same. Uses that do examine the WSDL will notice that even with the document soap message style, the signature of each method resembles an RPC. The method signature contains the contents of the document defined for the message instead of the document itself.

The primary interface into the library is the Client object. It provides methods for configuring the library and (2) sub-namespaces defined below. When the Client is created, it processes the wsdl and referenced schema(s). From this information, it derives a representation of this information which is used to provide the user with a service description and for message/reply processing.

Logging

The suds package use the Python standard lib logging package: all messages are at level DEBUG or ERROR.

To register a console handler you can use basicConfig:

#!python
import logging
logging.basicConfig(level=logging.INFO)

Once the console handler is configured, the user can enable module specific debugging doing the following: logging.getLogger(<desired package>).setLevel(logging.<desired-level>) A common example (show sent/received soap messages):

#!python
logging.getLogger('suds.client').setLevel(logging.DEBUG)

Suggested modules for debugging:

suds.client:: Set the logging level to DEBUG on this module to see soap messages (in & out) and http headers.
suds.transport:: Set the logging level to DEBUG on this module to see more details about soap messages (in& out) and http headers.
suds.xsd.schema:: Set the logging level to DEBUG on this module to see digestion of the schema(s).
suds.wsdl:: Set the logging level to ''DEBUG'' on this module to see digestion WSDL.

Basic Usage

Version: API^3^

The ''suds'' Client class provides a consolidated API for consuming web services. The object contains (2) sub-namespaces:

__service__:: The service namespace provides a proxy for the consumed service. This object is used to invoke operations (methods) provided by the service endpoint.

__factory__:: The factory namespace provides a factory that may be used to create instances of objects and types defined in the WSDL.

You will need to know the url for WSDL for each service used. Simply create a client for that service as follows:

#!python
from suds.client import Client
url = 'http://localhost:7080/webservices/WebServiceTestBean?wsdl'
client = Client(url)

You can inspect service object with: __str()__ as follows to get a list of methods provide by the service:

#!python
print client

Suds - version: 0.3.3 build: (beta) R397-20081121

Service (WebServiceTestBeanService) tns="http://test.server.enterprise.rhq.org/"
   Prefixes (1):
     ns0 = "http://test.server.enterprise.rhq.org/"
   Ports (1):
     (Soap)
       Methods:
         addPerson(Person person, )
         echo(xs:string arg0, )
         getList(xs:string str, xs:int length, )
         getPercentBodyFat(xs:string name, xs:int height, xs:int weight)
         getPersonByName(Name name, )
         hello()
         testExceptions()
         testListArg(xs:string[] list, )
         testVoid()
         updatePerson(AnotherPerson person, name name, )
   Types (23):
     Person
     Name
     Phone
     AnotherPerson

'''note:''' See example of service with multiple ports below.

The sample ouput lists that the service named ''WebServiceTestBeanService'' has methods such as getPercentBodyFat() and addPerson().

Simple Arguments

Let's start with the simple example. The getPercentBodyFat() method has the signature of getPercentBodyFat(''xs:string'' name, ''xs:int'' height, ''xs:int'' weight). In this case, the parameters are ''simple'' types. That is, they not objects. This method would be invoked as follows:

#!python
result = client.service.getPercentBodyFat('jeff', 68, 170)
print result

You have 21% body fat.

#!python
result = client.service.getPercentBodyFat(name='jeff', height=68, weight=170)
print result

You have 21% body fat.

#!python
d = dict(name='jeff', height=68, weight=170)
result = client.service.getPercentBodyFat(**d)
print result

You have 21% body fat.

Complex Arguments

The addPerson() method takes a ''person'' argument of type: ''Person'' and has a signature of: addPerson(''Person'' person, ) where parameter type is printed followed by it's name. There is a type (or class) named 'person' which is coincidentally the same name as the argument. Or in the case of getPercentBodyFat() the parameters are __string__ of type xs:string and __integer__ of type xs:int.

So, to create a ''Person'' object to pass as an argument we need to get a person argument using the ''factory'' sub-namespace as follows:

#!python
person = client.factory.create('Person')
print person

(Person)=
  {
    phone = []
    age = NONE
    name(Name) =
        {
            last = NONE
            first = NONE
        }
   }

As you can see, the object is created as defined by the WSDL. The list of phone number is empty so we'll have to create a ''Phone'' object:

#!python
phone = client.factory.create('Phone')
phone.npa = 202
phone.nxx = 555
phone.number = 1212

... and the name (Name object) and age need to be set and we need to create a name object first:

#!python
name = client.factory.create('Name')
name.first = 'Elmer'
name.last = 'Fudd'

Now, let's set the properties of our ''Person'' object

#!python
person.name = name
person.age = 35
person.phone = [phone]

#!python
person.phone.append(phone)

... and invoke our method named addPerson() as follows:

#!python
try:
   person_added = client.service.addPerson(person)
except WebFault as e:
  print e

It's that easy.

The ability to use python ''dict'' to represent complex objects was '''re-introduced in 0.3.8'''. However, this is not the preferred method because it may lead to passing incomplete objects. Also, this approach has a significant limitation. Users may __not__ use python ''dict'' for complex objects when they are subclasses (or extensions) of types defined in the wsdl/schema. In other words, if the schema defines a type to be an ''Animal'' and you wish to pass a ''Dog'' (assumes Dog ''isa'' Animal), you may __not__ use a ''dict'' to represent the dog. In this case, suds needs to set the xsi:type="Dog" but cannot because the python ''dict'' does not provide enough information to indicate that it is a ''Dog'' not an ''Animal''. Most likely, the server will reject the request and indicate that it cannot instantiate a abstract ''Animal''.

Complex Arguments Using Python (dict)

'''Note:''' version 0.3.8+

Just like the factory example, let's assume the addPerson() method takes a ''person'' argument of type: ''Person''. So, to create a ''Person'' object to pass as an argument we need to get a person object and we can do so by creating a simple python ''dict''.

#!python
person = {}

According to the WSDL we know that the Person contains a list of Phone objects so we'll need ''dict''s for them as well.

#!python
phone = {
    'npa':202,
    'nxx':555,
    'number':1212,
}

... and the name (Name object) and age need to be set and we need to create a name object first:

#!python
name = {
    'first':'Elmer',
    'last':'Fudd'
}

Now, let's set the properties of our ''Person'' object

#!python
person['name'] = name
person['age'] = 35
person['phone'] = [phone,]

... and invoke our method named addPerson() as follows:

#!python
try:
   person_added = client.service.addPerson(person)
except WebFault as e:
  print e

Faults

The Client can be configured to throw web faults as WebFault or to return a tuple (<status>, <returned-value>) instead as follows:

#!python
client = client(url, faults=False)
result = client.service.addPerson(person)
print result

( 200, person ...)

Options

The ''suds'' client has many that may be used to control the behavior of the library. Some are general options and others are transport options. Although, the options objects are exposed, the preferred and supported way to set/unset options is through:

The Client constructor
The Client.set_options()
The Transport constructor(s).

They are as follows:

faults:: Controls web fault behavior.
service:: Controls the default service name for multi-service wsdls.
port:: Controls the default service port for multi-port services.
location:: This overrides the service port address URL defined in the WSDL.
proxy:: Controls http proxy settings.
transport:: Controls the plugin web transport.
cache:: Provides caching of documents and objects related to loading the WSDL. Soap envelopes are never cached.
cachingpolicy:: The caching policy, determines how data is cached. The default is 0. version 0.4+
- 0 = XML documents such as WSDL & XSD.
- 1 = WSDL object graph.
headers:: Provides for extra http headers.
soapheaders:: Provides for soap headers.
wsse:: Provides for WS-Security object. \
__inject`:: Controls message/reply message injection.
doctor:: The schema doctor specifies an object used to fix broken schema(s).
xstq:: The XML schema type qualified flag indicates that xsi:type attribute __values__ should be qualified by namespace.
prefixes:: Elements of the soap message should be qualified (when needed) using XML prefixes as opposed to xmlns="" syntax.
timeout:: The URL connection timeout (seconds) default=90.
retxml:: Flag that causes the I{raw} soap envelope to be returned instead of the python object graph.
autoblend:: Flag that ensures that the schema(s) defined within the WSDL import each other.
nosend:: Flag that causes suds to generate the soap envelope but not send it. Instead, a RequestContext is returned Default: False.
sortnamespaces:: Flag that causes suds to sort namespaces alphabetically on storing them. Default: True.
allowUnknownMessageParts:: Raise exceptions when unknown message parts are detected when receiving a web service reply, compared to the operation's WSDL schema definition. Default: False.

Enumerations

Enumerations are handled as follows:

Let's say the wsdl defines the following enumeration:

#!xml
<xs:simpleType name="resourceCategory">
  <xs:restriction base="xs:string">
    <xs:enumeration value="PLATFORM"/>
    <xs:enumeration value="SERVER"/>
    <xs:enumeration value="SERVICE"/>
  </xs:restriction>
</xs:simpleType>

The client can instantiate the enumeration so it can be used. Misspelled references to elements of the ''enum'' will raise a AttrError exception as:

#!python
resourceCategory = client.factory.create('resourceCategory')
client.service.getResourceByCategory(resourceCategory.PLATFORM)

Factory

The factory is used to create complex objects defined the the wsdl/schema. This is __not__ necessary for parameters or types that are specified as ''simple'' types such as xs:string, xs:int, etc ...

The create() method should always be used becuase it returns objects that already have the proper structure and schema-type information. Since xsd supports nested type definition, so does create() using the (.) dot notation. For example suppose the (Name) type was not defined as a top level "named" type but rather defined within the (Person) type. In this case creating a (Name) object would have to be quanified by it's parent's name using the dot notation as follows:

#!python
name = client.factory.create('Person.Name')

If the type is in the same namespace as the wsdl (targetNamespace) then it may be referenced without any namespace qualification. If not, the type must be qualifed by either a namespace prefix such as:

#!python
name = client.factory.create('ns0:Person')

Or, the name can be fully qualified by the namespace itself using the full qualification syntax as (as of 0.2.6):

#!python
name = client.factory.create('{http://test.server.enterprise.rhq.org/}person')

Qualified names can only be used for the '''first''' part of the name, when using (.) dot notation to specify a path.

Services With Multiple Ports

Some services are defined with multiple ports as:

#!xml
<wsdl:service name="BLZService">
  <wsdl:port name="soap" binding="tns:BLZServiceSOAP11Binding">
    <soap:address location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
  </wsdl:port>
  <wsdl:port name="soap12" binding="tns:BLZServiceSOAP12Binding">
    <soap12:address location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
</wsdl:service>

And are reported by suds as:

#!python
url = 'http://www.thomas-bayer.com/axis2/services/BLZService?wsdl'
client = Client(url)
print client

Suds - version: 0.3.3 build: (beta) R397-20081121

Service (BLZService) tns="http://thomas-bayer.com/blz/"
   Prefixes (1)
     ns0 = "http://thomas-bayer.com/blz/"
   Ports (2):
     (soap)
       Methods (1):
         getBank(xs:string blz, )
     (soap12)
       Methods (1):
         getBank(xs:string blz, )
   Types (5):
      getBankType
      getBankResponseType
      getBankType
      getBankResponseType
      detailsType

This example only has (1) method defined for each port but it could very likely have may methods defined. Suds does not require the method invocation to be qualifed (as shown above) by the port as:

#!python
client.service.<port>.getBank()

unless the user wants to specify a particular port. In most cases, the server will work properly with any of the soap ports. However, if you want to invoke the getBank() method on this service the user may qualify the method name with the port.

There are (2) ways to do this:

Select a default port using the ''port'' option before invoking the method as:

#!python
client.set_options(port='soap')
client.service.getBank()

fully qualify the method as:

#!python
client.service.soap.getBank()

''''''After r551 version 0.3.7, this changes some to support multiple-services within (1) WSDL as follows:

This example only has (1) method defined for each port but it could very likely have may methods defined. Suds does not require the method invocation to be qualifed (as shown above) by the port as:

#!python
client.service[port].getBank()

There are many ways to do this:

Select a default port using the ''port'' option before invoking the method as:

#!python
client.set_options(port='soap')
client.service.getBank()

fully qualify the method using the port ''name'' as:

#!python
client.service['soap'].getBank()

fully qualify the method using the port ''index'' as:

#!python
client.service[0].getBank()

WSDL With Multiple Services & Multiple Ports

version: 0.3.7+

Some WSDLs define multiple services which may (or may not) be defined with multiple ports as:

#!xml
<wsdl:service name="BLZService">
  <wsdl:port name="soap" binding="tns:BLZServiceSOAP11Binding">
    <soap:address location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
  </wsdl:port>
  <wsdl:port name="soap12" binding="tns:BLZServiceSOAP12Binding">
    <soap12:address location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
</wsdl:service>
<wsdl:service name="OtherBLZService">
  <wsdl:port name="soap" binding="tns:OtherBLZServiceSOAP11Binding">
    <soap:address location="http://www.thomas-bayer.com:80/axis2/services/OtherBLZService"/>
  </wsdl:port>
  <wsdl:port name="soap12" binding="tns:OtherBLZServiceSOAP12Binding">
    <soap12:address location="http://www.thomas-bayer.com:80/axis2/services/OtherBLZService"/>
</wsdl:service>

And are reported by suds as:

#!python
url = 'http://www.thomas-bayer.com/axis2/services/BLZService?wsdl'
client = Client(url)
print client

Suds - version: 0.3.7 build: (beta) R550-20090820

Service (BLZService) tns="http://thomas-bayer.com/blz/"
   Prefixes (1)
     ns0 = "http://thomas-bayer.com/blz/"
   Ports (2):
     (soap)
       Methods (1):
         getBank(xs:string blz, )
     (soap12)
       Methods (1):
         getBank(xs:string blz, )
   Types (5):
      getBankType
      getBankResponseType
      getBankType
      getBankResponseType
      detailsType

Service (OtherBLZService) tns="http://thomas-bayer.com/blz/"
   Prefixes (1)
     ns0 = "http://thomas-bayer.com/blz/"
   Ports (2):
     (soap)
       Methods (1):
         getBank(xs:string blz, )
     (soap12)
       Methods (1):
         getBank(xs:string blz, )
   Types (5):
      getBankType
      getBankResponseType
      getBankType
      getBankResponseType
      detailsType

This example only has (1) method defined for each port but it could very likely have may methods defined. Suds does __not__ require the method invocation to be qualifed (as shown above) by the service and/or port as:

#!python
client.service[service][port].getBank()

unless the user wants to specify a particular service and/or port. In most cases, the server will work properly with any of the soap ports. However, if you want to invoke the getBank() method on the ''OtherBLZService'' service the user may qualify the method name with the service and/or port. If not specified, suds will default the service to the 1st server defined in the WSDL and default to the 1st port within each service. Also, when a WSDL defines (1) services, the [` subscript is applied to the port selection. This may be a little confusing because the syntax for subscripting can seem inconsistent. Both the ''service'' __and__ ''port'' may be subscripted either by name (string) or index (int).

There are many ways to do this:

Select a default service using the ''service'' option and default port using ''port'' option option before invoking the method as:

#!python
client.set_options(service='OtherBLZService', port='soap')
client.service.getBank()

method qualified by ''service'' and ''port'' as:

#!python
client.service['OtherBLZService']['soap'].getBank()

method qualified by ''service'' and ''port'' using indexes as:

#!python
client.service[1][0].getBank()

method qualified by ''service'' (by name) only as:

#!python
client.service['OtherBLZService'].getBank()

method qualified by ''service'' (by index) only as:

#!python
client.service[1].getBank()

Note, that if a WSDL defines more then one service, you __must__ qualify the ''service'' via option or by using the subscripting syntax in order to specify the ''port'' using the subscript syntax.

SOAP Headers

SOAP headers may be passed during the service invocation by using the ''soapheaders'' option as follows:

#!python
client = client(url)
token = client.factory.create('AuthToken')
token.username = 'Elvis'
token.password = 'TheKing'
client.set_options(soapheaders=token)
result = client.service.addPerson(person)

#!python
client = client(url)
userid = client.factory.create('Auth.UserID')
userid.set('Elvis')
password = client.factory.create('Auth.Password')
password.set('TheKing')
client.set_options(soapheaders=(userid,password))
result = client.service.addPerson(person)

#!python
client = client(url)
userid = 'Elmer'
passwd = 'Fudd'
client.set_options(soapheaders=(userid,password))
result = client.service.addPerson(person)

The ''soapheaders'' option may also be assigned a dictionary for those cases when optional headers are specified and users don't want to pass None place holders. This works much like the method parameters. Eg:

#!python
client = client(url)
myheaders = dict(userid='Elmer', passwd='Fudd')
client.set_options(soapheaders=myheaders)
result = client.service.addPerson(person)

Passing ''soapheaders'' by keyword (dict) is available in 0.3.4 (r442) and later.

Custom SOAP Headers

Custom SOAP headers may be passed during the service invocation by using the ''soapheaders'' option. A ''custom'' soap header is defined as a header that is required by the service by __not__ defined in the wsdl. Thus, the ''easy'' method of passing soap headers already described cannot be used. This is done by constructing and passing an Element or collection of Elements as follows:

#!python
from suds.sax.element import Element
client = client(url)
ssnns = ('ssn', 'http://namespaces/sessionid')
ssn = Element('SessionID', ns=ssnns).setText('123')
client.set_options(soapheaders=ssn)
result = client.service.addPerson(person)

Do __not__ try to pass the header as an XML ''string'' such as:

#!python
client = client(url)
ssn = '<ssn:SessionID>123</ssn:SessionID>'
client.set_options(soapheaders=ssn)
result = client.service.addPerson(person)

It will not work because: 1. Only Elements are processed as ''custom'' headers. 1. The XML string would be escaped as <ssn:SessionID>123</ssn:SessionID> anyway.

'''*Notes:''' 1. Passing single Elements as soap headers fixed in Ticket #232 (r533) and will be released on 0.3.7. 1. Reusing this Element in subsequent calls fixed in Ticket #233 (r533) and will be released on 0.3.7.

WS-SECURITY

As of r452 / 0.3.4 (beta) to provide basic ws-security with ''UsernameToken'' with ''clear-text'' password (no digest).

#!python
from suds.wsse import *
security = Security()
token = UsernameToken('myusername', 'mypassword')
security.tokens.append(token)
client.set_options(wsse=security)

or, if the ''Nonce'' and ''Create'' elements are needed, they can be generated and set as follows:

#!python
from suds.wsse import *
security = Security()
token = UsernameToken('myusername', 'mypassword')
token.setnonce()
token.setcreated()
token.setnonceencoding(True)
token.setpassworddigest('digest')
security.tokens.append(token)
client.set_options(wsse=security)

but, if you want to manually set the ''Nonce'' and/or ''Created'', you may do as follows:

#!python
from suds.wsse import *
security = Security()
token = UsernameToken('myusername', 'mypassword')
token.setnonce('MyNonceString...')
token.setcreated(datetime.now())
security.tokens.append(token)
client.set_options(wsse=security)

Multi-document (Document/Literal)

In most cases, services defined using the document/literal SOAP binding style will define a single document as the message payload. The <message/> will only have (1) <part/> which references an <element/> in the schema. In this case, suds presents a RPC view of that method by displaying the method signature as the contents (nodes) of the document. Eg:

#!xml
<schema>
...
<xs:element name="Foo" type = "tns:Foo"/>
<xs:complexType name="Foo">
  <xs:sequence>
    <xs:element name="name" type="xs:string"/>
    <xs:element name="age" type="xs:int"/>
  </xs:sequence>
</xs:complexType>
...
</schema>

<definitions>
...
<message name="FooMessage">
  <part name="parameters" element="Foo">
</message>
...
</definitions>

Suds will report the method ''foo'' signature as:

foo(xs:string name, xs:int age,)

This provides an RPC feel to the document/literal soap binding style.

Now, if the wsdl defines:

#!xml
<schema>
...
<xs:element name="Foo" type = "tns:Foo"/>
<xs:element name="Bar" type = "xs:string"/>
<xs:complexType name="Foo">
  <xs:sequence>
    <xs:element name="name" type="xs:string"/>
    <xs:element name="age" type="xs:int"/>
  </xs:sequence>
</xs:complexType>
...
</schema>

<definitions>
...
<message name="FooMessage">
  <part name="foo" element="Foo">
  <part name="bar" element="Bar">
</message>
...
</definitions>

Suds will be forced to report the method ''foo'' signature as:

foo(Foo foo, xs:int bar)

The message has (2) parts which defines that the message payload contains (2) documents. In this case, suds must present a /Document/ view of the method.

HTTP Authentication

Basic

As of version 0.3.3 and ''newer'', ''basic'' HTTP authentication as defined by RFC-2617 can be done as follows:

#!python
client = Client(url, username='elmer', password='fudd')

Authentication is provided by the (default) HttpAuthenticated ''Transport'' class defined in the transport.https module that follows the challenge (http 401) / response model defined in the RFC.

As of r537, ''0.3.7'' beta, a new ''Transport'' was added in the transport.http module that provides http authentication for servers that don't follow the challenge/response model. Rather, it sets the ''Authentication:'' http header on __all__ http requests. This transport can be used as follows:

#!python
from suds.transport.http import HttpAuthenticated
t = HttpAuthenticated(username='elmer', password='fudd')
client = Client(url, transport=t)

#!python
from suds.transport.http import HttpAuthenticated
t = HttpAuthenticated()
client = Client(url, transport=t, username='elmer', password='fudd')

For version: '''0.3.3 and older ONLY''':

Revision 63+ (and release 0.1.8+) includes the migration from httplib to urllib2 in the suds default transport which enables users to leverage all of the authentication features provided by urllib2. For example basic HTTP authentication could be implemented as follows:

#!python
myurl = 'http://localhost:7080/webservices/WebServiceTestBean?wsdl'
client = Client(myurl)

import urllib2
baseurl = 'http://localhost:7080/'
username = 'myuser'
password = 'mypassword'
passman = urllib2.HTTPPasswordMgrWithDefaultRealm()
passman.add_password(None, baseurl, username, password)
authhandler = urllib2.HTTPBasicAuthHandler(passman)

client.options.transport.urlopener  = urllib2.build_opener(authhandler)

The suds default HTTP transport uses urllib2.urlopen(), basic http authentication is handled automatically if you create the transport's urlopener correctly and set the urlopener.

Windows (NTLM)

As of 0.3.8, suds includes a NTLM transport based on urllib2. This implementation requires ''users'' to install the python-ntlm. It is __not__ packaged with ''suds''.

To use this, simply do something like:

#!python
from suds.transport.https import WindowsHttpAuthenticated
ntlm = WindowsHttpAuthenticated(username='xx', password='xx')
client = Client(url, transport=ntlm)

Proxies

The suds default transport handles proxies using urllib2.Request.set_proxy(). The proxy options can be passed set using Client.set_options. The proxy options must contain a dictionary where keys=protocols and values are the hostname (or IP) and port of the proxy.

#!python
...
d = dict(http='host:80', https='host:443', ...)
client.set_options(proxy=d)
...

Message Injection (Diagnostics/Testing)

The service API provides for message/reply injection.

To inject either a soap message to be sent or to inject a reply or fault to be processed as if returned by the soap server, simply specify the ''__inject'' keyword argument with a value of a dictionary containing either:

''msg'' = <message string>
''reply'' = <reply string>
''fault'' = <fault string>

when invoking the service. Eg:

Sending a ''raw'' soap message:

#!python
message = \
"""<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope>
    <SOAP-ENV:Body>
        ...
    </SOAP-ENV:Body>
</SOAP-ENV:Envelope>"""

print client.service.test(__inject={'msg':message})

Injecting a response for testing:

#!python
reply = \
"""<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope>
    <SOAP-ENV:Body>
        ...
    </SOAP-ENV:Body>
</SOAP-ENV:Envelope>"""

print client.service.test(__inject={'reply':reply})

SSL certificate verification & Custom Certificates

With Python 2.7.9, SSL/TLS verification is turned on by default.

This can be a problem when suds is used against an endpoint which has a self-signed certificate, which is quite common in the corporate intranet world.

One approach to turn off certificate validation in suds is to use a custom transport class. For example in Python 3:

import urllib.request
import ssl
import suds.transport.http

class UnverifiedHttpsTransport(suds.transport.http.HttpTransport):
    def __init__(self, *args, **kwargs):
        super(UnverifiedHttpsTransport, self).__init__(*args, **kwargs)

    def u2handlers(self):
        handlers = super(UnverifiedHttpsTransport, self).u2handlers()
        context = ssl.create_default_context()
        context.check_hostname = False
        context.verify_mode = ssl.CERT_NONE
        handlers.append(urllib.request.HTTPSHandler(context=context))
        return handlers

client = Client(url, transport=UnverifiedHttpsTransport())

In addition, if a custom set of certificates and/or root CA is needed, this can also be done via a custom transport class. For example, in Python 3:

class ClientHttpsTransport(HttpTransport):
    def __init__(self, certfile, keyfile, cafile, *args, **kwargs):
        super(ClientHttpsTransport, self).__init__(*args, **kwargs)
        self.certfile = certfile
        self.keyfile = keyfile
        self.cafile = cafile

    def u2handlers(self):
        handlers = super(ClientHttpsTransport, self).u2handlers()
        context = ssl.create_default_context(ssl.Purpose.SERVER_AUTH, cafile=self.cafile)
        context.load_cert_chain(self.certfile, self.keyfile)
        context.check_hostname = False
        context.verify_mode = ssl.CERT_NONE
        handlers.append(urllib.request.HTTPSHandler(context=context))
        return handlers

custom_https = ClientHttpsTransport('/path/to/certificate_file', '/path/to/key_file', '/path/to/ca_file')

client = Client(url, transport=custom_https),

Performance

As of 0.3.5 r473, suds provides some URL caching. By default, http get(s) such as getting the WSDL and importing XSDs are cached. The caching applies to URL such as those used to get the referenced WSDLs and XSD schemas but does __not__ apply to service method invocation as this would not make sense.

In 0.3.9, FileCache was replaced with ObjectCache.

The default ''cache'' is a ObjectCache with an expiration of (1) day.

This duration may be adjusted as follows:

#!python
cache = client.options.cache
cache.setduration(days=10)

#!python
 cache.setduration(seconds=90)

The ''duration'' my be (months, weeks, days, hours, seconds ).

The default ''location'' (directory) is ''/tmp/suds'' so ''Windows'' users will need to set the ''location'' to something that makes sense on windows.

The cache is an option and can be set with any kind of Cache object or may be disabled by setting the option to ''None''. So, uses may ''plug-in'' any kind of cache they want.

#!python
from suds.cache import Cache
class MyCache(Cache)
 ...
client.set_options(cache=MyCache())

To disable caching:

#!python
client.set_options(cache=None)

Fixing Broken Schema(s)

There are many cases where the schema(s) defined both within the WSDL or imported are broken. The most common problem is failure to import the follow proper import rules. That is, references are made in one schema to named objects defined in another schema without importing it. The doctor module defines a set of classes for ''mending'' broken schema(s).

Doctors

The Doctor class provides the interface for classes that provide this service. Once defined, the ''doctor'' can be specified using the schema ''doctor'' as an option when creating the Client. Or, you can use one of the stock ''doctors''

ImportDoctor - Used to fix ''import'' problems. For example:

#!python
imp = Import('http://schemas.xmlsoap.org/soap/encoding/')
imp.filter.add('http://some/namespace/A')
imp.filter.add('http://some/namespace/B')
doctor = ImportDoctor(imp)
client = Client(url, doctor=doctor)

In this example, we've specified that the ''doctor'' should examine schema(s) with a ''targetNamespace'' of http://some/namespace/A or http://some/namespace/B and ensure that the schema for the http://schemas.xmlsoap.org/soap/encoding/ is imported. If those schema(s) do not have an <xs:import/> for those namespaces, it is added.

For cases where the ''schemaLocation'' is not bound to the ''namespace'', the Import can be created specifying the ''location'' has follows:

#!python
imp = Import('http://www.w3.org/2001/XMLSchema', location='http://www.w3.org/2001/XMLSchema.xsd')
imp.filter.add('http://some/namespace/A')
imp.filter.add('http://some/namespace/B')
doctor = ImportDoctor(imp)
client = Client(url, doctor=doctor)

A commonly referenced schema (that is not imported) is the SOAP section 5 encoding schema. This can now be fixed as follows:

#!python
imp = Import('http://schemas.xmlsoap.org/soap/encoding/')
imp.filter.add('http://some/namespace/A')
doctor = ImportDoctor(imp)
client = Client(url, doctor=doctor)

'''note:''' Available in r512+ and 0.3.6 ''beta''.

Binding Schema Locations (URL) to Namespaces

Some WSDL(s) schemas import as: <import namespace="http://schemas.xmlsoap.org/soap/encoding/%22/> without schemaLocation="" and expect processor to use the namespace URI as the schema location for the namespace. The specifications for processing <import/> leave the resolution of the imported namespace to a schema to the descession of the processor (in this case suds) when @schemaLocation is not specified. Suds always looks within the WSDL for a schema but does not look outside unless:

A schemaLocation is specified, or
A static binding is specified using the following syntax:

#!python
from suds.xsd.sxbasic import Import
ns = 'http://schemas.xmlsoap.org/soap/encoding/'
location = 'http://schemas.xmlsoap.org/soap/encoding/'
Import.bind(ns, location)

Or, the shorthand (when location is the same as the namespace URI)

#!python
Import.bind(ns)

'''note:''' http://schemas.xmlsoap.org/soap/encoding/' automatically ''bound'' in 0.3.4 as of (r420).

Plugins

New in 0.4 is a plugin facility. It is intended to be a general, more extensible, mechanism for users to inspect/modify suds while it is running. Today, there are two ''one-off'' ways to do this:

1. bindings.Binding.replyfilter - The reply text can be inspected & modified. 2. xsd.Doctor - The doctor ''option'' used to mend broken schemas.

The plugin module provides a number of classes but users really only need to be concerned with a few:

The Plugin class which defines the interface for user plugins
The ''Context'' classes which are passed to the plugin.

The plugins are divided into (4) classes based on the ''tasks'' of the soap client:

''Initialization'' :: The client initialization task which is when the client has digested the WSDL and associated XSD. ''Document Loading'' :: The document loading task. This is when the client is loading WSDL & XSD documents. ''Messaging'' :: The messaging task is when the client is doing soap messaging as part of method (operation) invocation.

InitPlugin

The InitPlugin currently has (1) hook:

''initialized()'' :: Called after the client is initialized. The context contains the ''WSDL'' object.

DocumentPlugin

The DocumentPlugin currently has (2) hooks::

''loaded()'' :: Called before parsing a ''WSDL'' or ''XSD'' document. The context contains the url & document text.

''parsed()'' :: Called after parsing a ''WSDL'' or ''XSD'' document. The context contains the url & document ''root''.

MessagePlugin

The MessagePlugin currently has (5) hooks ::

*marshalled():: Provides the plugin with the opportunity to inspect/modify the envelope '''Document''' __before__ it is sent.

sending():: Provides the plugin with the opportunity to inspect/modify the message '''text''' __before__ it is sent.
received():: Provides the plugin with the opportunity to inspect/modify the received XML '''text''' __before__ it is SAX parsed.
parsed():: Provides the plugin with the opportunity to inspect/modify the sax parsed DOM tree for the reply __before__ it is unmarshalled.
unmarshalled():: Provides the plugin with the opportunity to inspect/modify the unmarshalled reply __before__ it is returned to the caller.

General usage:

#!python
from suds.plugin import *

class MyPlugin(DocumentPlugin):
        ...

plugin = MyPlugin()
client = Client(url, plugins=[plugin])

Plugins need to override __only__ those methods (hooks) of interest

not all of them. Exceptions are caught and logged.

Here is an example. Say I want to add some attributes to the document root element in the soap envelope. Currently suds does not provide a way to do this using the main API. Using a plugin much like the schema doctor, we can do this.

Say our envelope is being generated by suds as:

<soapenv:Envelope>
  <soapenv:Body>
    <ns0:foo>
      <name>Elmer Fudd</name>
      <age>55</age>
    </ns0:foo>
  </soapenv:Body>
</soapenv:Envelope>

But what you need is:

<soapenv:Envelope>
  <soapenv:Body>
    <ns0:foo id="1234" version="2.0">
      <name>Elmer Fudd</name>
      <age>55</age>
    </ns0:foo>
  </soapenv:Body>
</soapenv:Envelope>

#!python
from suds.plugin import MessagePlugin

class MyPlugin(MessagePlugin):
    def marshalled(self, context):
        body = context.envelope.getChild('Body')
        foo = body[0]
        foo.set('id', '12345')
        foo.set('version', '2.0')

client = Client(url, plugins=[MyPlugin()])

In the future, the ''Binding.replyfilter'' and ''doctor'' __option__ will likely be deprecated. The ImportDoctor has been extended to implement the Plugin.onLoad() API.

In doing this, we can treat the ImportDoctor as a plugin:

#!python
imp = Import('http://www.w3.org/2001/XMLSchema')
imp.filter.add('http://webservices.serviceU.com/')
d = ImportDoctor(imp)
client = Client(url, plugins=[d])

We can also replace our Binding.replyfilter() with a plugin as follows:

#!python
def myfilter(reply):
  return reply[1:]

Binding.replyfilter = myfilter

# replace with:

class Filter(MessagePlugin):
    def received(self, context):
        reply = context.reply
        context.reply = reply[1:]

client = Client(url, plugins=[Filter()])

Technical (FYI) Notes

XML namespaces are represented as a tuple (prefix, URI). The default namespace is (None,None).
The suds.sax module was written becuase elementtree and other python XML packages either: have a DOM API which is very unfriendly or: (in the case of elementtree) do not deal with namespaces and especially prefixes sufficiently.
A qualified reference is a type that is referenced in the WSDL such as <tag type="tns:Person/> where the qualified reference is a tuple ('Person', ('tns','http://myservce/namespace')) where the namespace is the 2nd part of the tuple. When a prefix is not supplied as in <tag type="Person/>, the namespace is the targetNamespace for the defining fragment. This ensures that all lookups and comparisons are fully qualified.

frost-nzcr4 / suds