BotBridge to link several PokemonBots under one Telegram chat contact. Developers are welcome to join https://t.me/PokemonBotSupport
The PokemonBotBridge builds a passive bridge between several PokemonRaidBots and PokemonQuestBots. Therefore setup the PokemonBotBridge as mentioned below.
git clone https://github.com/florianbecker/PokemonBotBridge.git
Copy config.json.example to config.json and edit (values explained further).
Set DEFAULT_BOT to the bot which shall receive the command or data when no other suitable bot was specified in the request.
Set LOCATION_BOT to the bot which shall receive messages with a shared location send to the bot / bot bridge.
Set EXCLUDE_DIRS to the directories which should be exluded from the bridge logic. You can add multiple folder separated by comma. Example: "EXCLUDE_DIRS":"core,backup"
Set PORTALMAPBOT to the bot which shall receive messages from @PortalMapBot. Example: "PORTALMAPBOT":"raid"
Set INGRESSPORTALBOT to the bot which shall receive messages from @Ingressportalbot. Example: "Ingressportalbot":"quest"
Start chat with https://t.me/BotFather and create one bot token.
Bot Settings:
- Enable Inline mode
- Allow Groups
- Group Privacy off
For each bot under the bridge create a subfolder and set up that bot in the subfolder as their README says, except for the steps with the Telegram BotFather, the APIKEY_HASH's SHA512 value and the webhook! Skip those part when setting up the bots itself!
Due to technical limitations and also for usability reasons please keep the names of the subfolders for each bot as short as possible. If the foldername exceeds a length of 8 characters, a hint will be logged in the logfile of the respective bot and no response will be given until the length issue is fixed!
A little example how the folder structure with the PokemonBotBridge should look like. We are currently in the BotBridge directory:
. # PokemonBotBridge folder
├── config.php # BotBridge config
├── config.php.example # BotBridge example config
├── index.php # BotBridge index.php
├── ...
├── 5ave # 5th Avenue bot folder
│ ├── config.php # 5th Avenue config
│ ├── index.php # 5th Avenue index.php
│ └── ...
├── cpark # Central Park bot folder
│ ├── config.php # Central Park config
│ ├── index.php # Central Park index.php
│ └── ...
├── jersey # Jersey City bot folder
│ ├── config.php # Jersey City config
│ ├── index.php # Jersey City index.php
│ └── ...
├── wall # Wallstrett bot folder
│ ├── config.php # Wallstrett config
│ ├── index.php # Wallstrett index.php
│ └── ...
└── ...
All the bots in the subfolder share the same webhook which will be set in the next step.
Use https://www.miniwebtool.com/sha512-hash-generator/ to create the hashed value of the bot token (preferably lowercase).
Edit then each bots config file and set the APIKEY_HASH to the hashed bot token and BRIDGE_MODE to true - that's it!
Set Telegram webhook via one of the bots webhook.html file, e.g. https://your-hostname/bridge/botdir/webhook.html
Make sure to point the webhook to the bridge and NOT to the bot itself in the subfolder! This is important as the PokemonBotBridge will forward each request to the corresponding bot in the right subfolder.
Each bot is now accessible via its foldername plus the actual command.
We created the folders for several PokemonRaidBots for Wallstreet (wallst), Jersey City (jersey), 5th Avenue (5ave) and Central Park (cpark) area and set the DEFAULT_BOT to 5ave and the LOCATION_BOT to cpark:
walljersey5avecpark
To create a raid in the 5th Avenue area, we simply can use the /start command as we defined that bot as the default bot. Alternatively the folder name 5ave plus the command start, so /5avestart, to start the raid creation works too. If someone shares a location now with the bot, the Central Park area bot will answer since we set that bot to be the LOCATION_BOT.
To create a raid in the Wallstreet district, the name of the subfolder from the bot wall plus the commandname start simply need to be combined to /wallstart to start the raid creation. Same for the Jersey City area - folder name plus command name: /jerseystart
For every other command the same scheme applies: bot directory name plus command name
For example to use the delete command for the Central Park area bot, you easily send /cparkdelete to the bot.
Callback queries are altered automatically once the BRIDGE_MODE is set to true in each bots config file, so you don't need to care about that. All you need to know is the directory name of the bot and the command you'd like to sent to the bot.
That's it - enjoy the advantages of the PokemonBotBridge!