macOS 13.2 SIGSEGV when updating firmware from file.
lvfrazao opened this issue · comments
While trying to install custom firmware from a file the qFlipper application crashed with a seg fault.
Crashed Thread: 12 Thread (pooled)
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000038
Exception Codes: 0x0000000000000001, 0x0000000000000038
Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process: exc handler [31384]
Stack trace:
Thread 12 Crashed:: Thread (pooled)
0 qFlipper 0x104835dcc TarArchive::root() const + 0
1 qFlipper 0x104837810 TarZipUncompressor::extractFiles() + 40
2 qFlipper 0x104837d5c QtConcurrent::RunFunctionTaskBase<void>::run() + 80
3 qFlipper 0x105e27748 QThreadPoolThread::run() + 220
4 qFlipper 0x105e23680 QThreadPrivate::start(void*) + 332
5 libsystem_pthread.dylib 0x1a0dbe06c _pthread_start + 148
6 libsystem_pthread.dylib 0x1a0db8e2c thread_start + 8
Thread 12 crashed with ARM Thread State (64-bit):
x0: 0x0000000000000000 x1: 0x00000001048377e8 x2: 0x0000000128a08200 x3: 0x000000000000000b
x4: 0x0000000000000000 x5: 0x00000000000000a0 x6: 0x0000000000001000 x7: 0x000000003b9ac860
x8: 0x0000000000000000 x9: 0x0000600001c37080 x10: 0x0000000000bf3d01 x11: 0x00000000005f8c00
x12: 0x0000000128800028 x13: 0x00000000ffff800b x14: 0x0000000000001000 x15: 0x00000000ffff7dff
x16: 0x00000001288081f8 x17: 0x00000001a0c22640 x18: 0x0000000000000000 x19: 0x0000600001c37080
x20: 0x0000600001c37480 x21: 0x00006000006f0040 x22: 0x0000600001c37480 x23: 0x0000000000000001
x24: 0x57b419022e2f7e49 x25: 0x0000000000000090 x26: 0x0000000000000001 x27: 0x000000010df6bae0
x28: 0x0000000000000000 fp: 0x000000016b8a6e90 lr: 0x0000000104837810
sp: 0x000000016b8a6e30 pc: 0x0000000104835dcc cpsr: 0x60001000
far: 0x0000000000000038 esr: 0x92000006 (Data Abort) byte read Translation fault
To Reproduce
Steps to reproduce the behavior:
- Download unleashed firmware 0.34 from here: https://github.com/DarkFlippers/unleashed-firmware/releases/tag/unlshd-034
- Open qFlipper application
- Click on 'Install from File'
- Select
~/Downloads/flipper-z-f7-update-unlshd-034-2.tgz
Expected behavior
Device is updated with new firmware, qFlipper does not crash.
Actual behavior
qFlipper crashes, device is not updated to new firmware.
Additional troubleshooting
- Does the issue persist if you try multiple times? YES
- Does reconnecting/rebooting Flipper solve it? NO
Does it crash if you try to install the official firmware from here? (while also having the stock firmware installed on your Flipper Zero).
I found that the shasum was not correct after I downloaded via Safari (OSX was trying to un-compress after download and had errors). I got the firmware installed by pulling the file down using wget instead and had no problems installing via qFlipper.
@jroberts235 Does qFlipper crash if you use the file downloaded by Safari?