Giters

fledge-iot / fledge

An open source platform for the Industrial Internet of Things, it acts as an edge gateway between sensor devices and cloud storage systems.

Home Page:https://www.lfedge.org/projects/fledge/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Build Error on Rpi CM3 with Bullseye dist.

h4med opened this issue · comments

commented

Hi,
I have followed all steps in building guide:
https://fledge-iot.readthedocs.io/en/latest/building_fledge/building_fledge.html

I am building on a Raspberry Pi Compute Module 3 with latest OS from Foundation: Bullseye 2021-10-30.
All necessary libraries are installed and OS is up to date and I tried several times but I get the following error while building the MAIN branch:

[...]
In file included from /usr/include/python3.9/pytime.h:6,
from /usr/include/python3.9/Python.h:85,
from /home/pi/Fledge/C/services/north-plugin-interfaces/python/python_plugin_interface.cpp:16:
/home/pi/Fledge/C/services/north-plugin-interfaces/python/python_plugin_interface.cpp: In function ‘uint32_t pl ugin_send_fn(PLUGIN_HANDLE, const std::vector<Reading*>&)’:
/usr/include/python3.9/object.h:633:41: error: expected ‘(’ before ‘PyType_HasFeature’
633 | #define PyType_FastSubclass(type, flag) PyType_HasFeature(type, flag)
| ^~~~~~~~~~~~~~~~~
/usr/include/python3.9/longobject.h:15:9: note: in expansion of macro ‘PyType_FastSubclass’
15 | PyType_FastSubclass(Py_TYPE(op), Py_TPFLAGS_LONG_SUBCLASS)
| ^~~~~~~~~~~~~~~~~~~
/home/pi/Fledge/C/services/north-plugin-interfaces/python/python_plugin_interface.cpp:392:5: note: in expansion of macro ‘PyLong_Check’
392 | if PyLong_Check(pReturn)
| ^~~~~~~~~~~~
make[3]: *** [C/services/north-plugin-interfaces/python/CMakeFiles/north-plugin-python-interface.dir/build.make :95: C/services/north-plugin-interfaces/python/CMakeFiles/north-plugin-python-interface.dir/python_plugin_inter face.cpp.o] Error 1
make[3]: Leaving directory '/home/pi/Fledge/cmake_build'
make[2]: *** [CMakeFiles/Makefile2:1043: C/services/north-plugin-interfaces/python/CMakeFiles/north-plugin-pyth on-interface.dir/all] Error 2
make[2]: Leaving directory '/home/pi/Fledge/cmake_build'
make[1]: *** [Makefile:149: all] Error 2
make[1]: Leaving directory '/home/pi/Fledge/cmake_build'
make: *** [Makefile:244: c_build] Error 2

commented

Hello,

We currently support only buster-based images for building fledge. You may use the last buster-based release, which was on 2021-05-28 and is available at https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-05-28/.

The support for building fledge on the latest bullseye-based Raspberry Pi OS is not added yet, but is known and is in the roadmap.

Thanks!