Jk Jk-b2a24s20p disconnection issues..
Catchmydrift opened this issue · comments
Hi, having connection issues with JK bmses 2 x Jk-b2a24s20p. They connect initially, but for only about 1 minute, then disconnect. They will reconnect a few minutes later, then the cycle repeats.. Any clues from the code below?
Thanks
(it was all working fine untill i had to upgrade home assistant due to putting it onto ssd instead of sd card.. Wasnt ever going to upgrade, but was forced too..)
19:08:15 INFO [main] Bleak version 0.13.1a1, BtBackend version bluez-v5.66
19:08:15 INFO [bt] BMS JKBt(C8:47:8C:E5:AB:CB) keep alive enabled
19:08:15 INFO [bt] BMS JKBt(C8:47:8C:EA:FF:1E) keep alive enabled
19:08:15 INFO [main] connecting mqtt mqtt_user@core-mosquitto
19:08:15 INFO [main] Fetching 2 BMS + 0 others serially, period=1.00s, keep_alive=True
19:08:15 INFO [sampling] connecting bms JKBt(C8:47:8C:E5:AB:CB)
19:08:15 INFO [main] mqtt watchdog loop started with timeout 900.0s
19:08:19 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner
19:08:46 ERROR [sampling] JK-B2A24S20P error: [org.bluez.Error.Failed] le-connection-abort-by-local
19:08:46 INFO [sampling] Bleak version 0.13.1a1
19:08:46 INFO [sampling] connecting bms JKBt(C8:47:8C:EA:FF:1E)
19:08:46 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner
19:09:23 ERROR [sampling] Bottom-Bank error: [org.bluez.Error.Failed] le-connection-abort-by-local
19:09:23 INFO [sampling] Bleak version 0.13.1a1
19:09:23 INFO [sampling] connecting bms JKBt(C8:47:8C:EA:FF:1E)
19:09:23 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner
19:09:57 INFO [sampling] connected bms JKBt(C8:47:8C:EA:FF:1E)!
19:09:57 INFO [sampling] Bottom-Bank subscribing for {'charge': True, 'discharge': True} switch change
19:09:57 INFO [mqtt_util] subscribe homeassistant/switch/Bottom-Bank/charge/set
19:09:57 INFO [mqtt_util] subscribe homeassistant/switch/Bottom-Bank/discharge/set
19:09:58 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:09:58 INFO [sampling] Bottom-Bank volt=3300,3299,3299,3298,3299,3298,3298,3299 temp=[0.0, 0.0]
19:09:58 INFO [sampling] JKBt(C8:47:8C:EA:FF:1E) times: connect=34.44s fetch=0.27s
19:09:58 INFO [sampling] connecting bms JKBt(C8:47:8C:E5:AB:CB)
19:09:59 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner
19:10:14 INFO [sampling] connected bms JKBt(C8:47:8C:E5:AB:CB)!
19:10:15 INFO [sampling] JK-B2A24S20P subscribing for {'charge': True, 'discharge': True} switch change
19:10:15 INFO [mqtt_util] subscribe homeassistant/switch/JK-B2A24S20P/charge/set
19:10:15 INFO [mqtt_util] subscribe homeassistant/switch/JK-B2A24S20P/discharge/set
19:10:15 INFO [sampling] JK-B2A24S20P: BmsSampl(96.0%,U=26.4V,I=-7.00A,P=-185W,q=268.7Ah/280,mos=23.1°C)
19:10:15 INFO [sampling] JK-B2A24S20P volt=3306,3303,3302,3303,3302,3301,3303,3305 temp=[21.7, 21.1]
19:10:15 INFO [sampling] JKBt(C8:47:8C:E5:AB:CB) times: connect=16.48s fetch=0.66s
19:10:16 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:10:16 INFO [sampling] Bottom-Bank volt=3299,3298,3299,3299,3299,3298,3298,3298 temp=[0.0, 0.0]
19:10:17 INFO [sampling] JK-B2A24S20P: BmsSampl(96.0%,U=26.4V,I=-7.21A,P=-191W,q=268.7Ah/280,mos=23.1°C)
19:10:17 INFO [sampling] JK-B2A24S20P volt=3306,3305,3302,3302,3303,3302,3303,3302 temp=[21.7, 21.1]
19:10:19 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:10:19 INFO [sampling] Bottom-Bank volt=3300,3299,3298,3299,3299,3298,3298,3299 temp=[0.0, 0.0]
19:10:20 INFO [sampling] JK-B2A24S20P: BmsSampl(96.0%,U=26.4V,I=-7.00A,P=-185W,q=268.7Ah/280,mos=23.1°C)
19:10:20 INFO [sampling] JK-B2A24S20P volt=3305,3305,3302,3302,3302,3302,3303,3303 temp=[21.7, 21.1]
19:10:22 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:10:22 INFO [sampling] Bottom-Bank volt=3300,3299,3300,3300,3300,3298,3298,3299 temp=[0.0, 0.0]
19:10:23 INFO [sampling] JK-B2A24S20P: BmsSampl(96.0%,U=26.4V,I=-7.00A,P=-185W,q=268.6Ah/280,mos=23.1°C)
19:10:23 INFO [sampling] JK-B2A24S20P volt=3306,3305,3303,3302,3302,3301,3303,3303 temp=[21.7, 21.1]
19:10:25 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:10:25 INFO [sampling] Bottom-Bank volt=3302,3300,3300,3299,3298,3295,3297,3298 temp=[0.0, 0.0]
19:10:28 INFO [sampling] JK-B2A24S20P: BmsSampl(95.9%,U=26.4V,I=-7.21A,P=-191W,q=268.6Ah/280,mos=23.1°C)
19:10:28 INFO [sampling] JK-B2A24S20P volt=3305,3303,3302,3302,3302,3301,3303,3303 temp=[21.7, 21.1]
19:10:28 INFO [sampling] JKBt(C8:47:8C:E5:AB:CB) times: connect=0.00s fetch=1.96s
19:10:29 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:10:29 INFO [sampling] Bottom-Bank volt=3300,3299,3299,3300,3299,3298,3298,3299 temp=[0.0, 0.0]
19:10:29 INFO [sampling] JKBt(C8:47:8C:EA:FF:1E) times: connect=0.00s fetch=1.22s
19:10:31 INFO [sampling] JK-B2A24S20P: BmsSampl(95.9%,U=26.4V,I=-7.21A,P=-191W,q=268.6Ah/280,mos=23.1°C)
19:10:31 INFO [sampling] JK-B2A24S20P volt=3306,3303,3301,3302,3303,3302,3303,3303 temp=[21.8, 21.1]
19:10:31 INFO [sampling] JKBt(C8:47:8C:E5:AB:CB) times: connect=0.00s fetch=1.08s
19:10:31 INFO [sampling] Bottom-Bank: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,q=13500.4Ah/0,mos=0.0°C)
19:10:31 INFO [sampling] Bottom-Bank volt=3299,3299,3299,3299,3299,3297,3298,3299 temp=[0.0, 0.0]
19:10:39 WARNING [bt] BMS JKBt(C8:47:8C:E5:AB:CB) disconnected after 27.0s!
Traceback (most recent call last):
File "/app/main.py", line 312, in
asyncio.run(main())
File "/usr/lib/python3.11/asyncio/runners.py", line 190, in run
return runner.run(main)
^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/asyncio/runners.py", line 118, in run
return self._loop.run_until_complete(task)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/asyncio/base_events.py", line 653, in run_until_complete
return future.result()
^^^^^^^^^^^^^^^
File "/app/main.py", line 282, in main
await fetch_loop(fn, period=sample_period, max_errors=max_errors)
File "/app/main.py", line 35, in fetch_loop
await fn()
File "/app/main.py", line 275, in fn
await t()
File "/app/bmslib/sampling.py", line 67, in call
return await self.sample()
^^^^^^^^^^^^^^^^^^^
File "/app/bmslib/sampling.py", line 95, in sample
sample = await bms.fetch()
^^^^^^^^^^^^^^^^^
File "/app/bmslib/jikong.py", line 222, in fetch
await self._fetch_futures.wait_for(0x02, self.TIMEOUT)
File "/app/bmslib/init.py", line 50, in wait_for
return await asyncio.wait_for(self._futures.get(name), timeout)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/asyncio/tasks.py", line 479, in wait_for
return fut.result()
^^^^^^^^^^^^
asyncio.exceptions.CancelledError
19:10:39 INFO [main] exit signal handler... (), {}, shutdown already False
s6-rc: info: service legacy-services: stopping
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped
Then this follows:
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
19:12:20 INFO [bt] BT Discovery:
19:12:25 INFO [bt] BT Device JK_B2A24S20P address=C8:47:8C:EA:FF:1E
19:12:25 INFO [bt] BT Device 30-78-CB-F1-1A-86 address=30:78:CB:F1:1A:86
19:12:25 INFO [bt] BT Device BTG042 address=38:3B:26:5A:71:69
19:12:25 INFO [bt] BT Device BTG077 address=38:3B:26:2E:B9:B6
19:12:25 INFO [bt] BT Device 4D-A7-38-B7-FC-24 address=4D:A7:38:B7:FC:24
19:12:25 INFO [bt] BT Device JK-B2A24S20P address=C8:47:8C:E5:AB:CB
19:12:25 INFO [bt] BT Device E5-B6-E6-9F-D4-84 address=E5:B6:E6:9F:D4:84
19:12:25 INFO [bt] BT Device 6A-DE-E9-31-08-06 address=6A:DE:E9:31:08:06
19:12:25 INFO [bt] BT Device 58-8C-58-59-E6-56 address=58:8C:58:59:E6:56
19:12:25 INFO [main] Bleak version 0.13.1a1, BtBackend version bluez-v5.66
19:12:25 INFO [bt] BMS JKBt(C8:47:8C:E5:AB:CB) keep alive enabled
19:12:25 INFO [bt] BMS JKBt(C8:47:8C:EA:FF:1E) keep alive enabled
19:12:25 INFO [main] connecting mqtt mqtt_user@core-mosquitto
19:12:25 INFO [main] Fetching 2 BMS + 0 others serially, period=1.00s, keep_alive=True
19:12:25 INFO [sampling] connecting bms JKBt(C8:47:8C:E5:AB:CB)
19:12:25 INFO [main] mqtt watchdog loop started with timeout 900.0s
19:12:27 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner
19:12:52 ERROR [sampling] JK-B2A24S20P error: [org.bluez.Error.Failed] le-connection-abort-by-local
19:12:52 INFO [sampling] Bleak version 0.13.1a1
19:12:52 INFO [sampling] connecting bms JKBt(C8:47:8C:EA:FF:1E)
19:12:54 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner
19:13:23 ERROR [sampling] Bottom-Bank error: [org.bluez.Error.Failed] le-connection-abort-by-local
19:13:23 INFO [sampling] Bleak version 0.13.1a1
19:13:23 INFO [sampling] connecting bms JKBt(C8:47:8C:E5:AB:CB)
19:13:28 INFO [jikong] normal connect failed ([org.bluez.Error.Failed] le-connection-abort-by-local), connecting with scanner