When running the integration, the system 'hangs'

[ongenal]

After installation of NHC2, running the integration never comes to an and, nor the niko API key is requested

[Filip Van Ham]

I've also had this happen some times. I think it's home assistant installing dependencies (not sure) but when I tried again a bit later, it worked without issue.

[ongenal]

Re-installed already twice, allos tested on another installation, but with the same result I think you run on a rasberrypi, My installation is on a HASS.io that runs in docker on a synology NAS. Any hint to debug, or find the rootcause. Thanks Luc From: Filip Van Ham <[e-mail]> Reply to: filipvh/hass-nhc2 <[e-mail]> Date: Tuesday, 9 February 2021 at 13:32 To: filipvh/hass-nhc2 <[e-mail]> Cc: ongenal <[e-mail]>, Author <[e-mail]> Subject: Re: [filipvh/hass-nhc2] When running the integration, the system 'hangs' (#17) I've also had this happen some times. I think it's home assistant installing dependencies (not sure) but when I tried again a bit later, it worked without issue. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#17 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASSJDKLYEHSFXITZ3A62KQTS6ETMLANCNFSM4XKRKBDQ>.

[Filip Van Ham]

I also run on hass.io, it does however take some time before it works.
The first time I let the spinner go for some time, then refreshes en retried, en it worked.
I think you are not the only one using NHC2 like that (hass.io on synology), but not sure.
We have a slack group were you can ask this...

[ongenal]

Thanks for the tip (and the implementation), will give it a try on slack Luc From: Filip Van Ham <[e-mail]> Reply to: filipvh/hass-nhc2 <[e-mail]> Date: Tuesday, 9 February 2021 at 13:40 To: filipvh/hass-nhc2 <[e-mail]> Cc: ongenal <[e-mail]>, Author <[e-mail]> Subject: Re: [filipvh/hass-nhc2] When running the integration, the system 'hangs' (#17) I also run on hass.io, it does however take some time before it works. The first time I let the spinner go for some time, then refreshes en retried, en it worked. I think you are not the only one using NHC2 like that (hass.io on synology), but not sure. We have a slack group were you can ask this... https://join.slack.com/t/nhc2/shared_invite/zt-m33jb83m-Jukv_~GphqPt6Ny_qUfZTA — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#17 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASSJDKIJPWVRXEKDG4X33H3S6EUMTANCNFSM4XKRKBDQ>.

[stevo199]

I got it working. Just ad the configuration (host, username,pasword) to the configuration.yaml file. And restart HA
For me it worked