A Python controller for Tobii Pro Glasses 2 ======================= A Python controller for accessing eye-tracker data and managing recordings, participants and calibrations using the wearable Tobii Pro Glasses 2. The code is based on the Tobii Pro Glasses 2 APIs available at: https://www.tobiipro.com/product-listing/tobii-pro-glasses-2-sdk/ This project is available on Github at: https://github.com/ddetommaso/TobiiProGlasses2_PyCtrl Package installation ======================= $ python -m pip install --upgrade tobiiglassesctrl (Python 2.7.x) or $ python3 -m pip install --upgrade tobiiglassesctrl (Python 3.5.x) Tobii Pro Glasses 2 Connection ======================= Connect the glasses through Wifi or Ethernet connection. You have 3 methods to connect with the device. 1. Network discovery tobiiglasses = TobiiGlassesController() If you do not pass any parameter to the constructor, A set of discovery packets will be sent through all the network interfaces of your system waiting for an answer from the glasses. 2. Wifi connection tobiiglasses = TobiiGlassesController("192.168.71.50") Once a wireless connection with the glasses is established you can run the controller providing the ipv4 address to the constructor. 3. Ethernet connection (be sure that it is configured as link-local IPv6). tobiiglasses = TobiiGlassesController("fe80::76fe:48ff:ff00:hell") In case you have multiple network interfaces in your system, please specify the network interface name when you create a TobiiGlassesController object: For Linux systems you should specify the name of the net interface ... tobiiglasses = TobiiGlassesController("fe80::76fe:48ff:ff00:hell%eth0") # ... while for Windows systems you should specify the net interface index tobiiglasses = TobiiGlassesController("fe80::76fe:48ff:ff00:hell%7") Python Examples ======================= The following Python examples are available: - connect.py - A Python script to connect with the eye-tracker. - calibrate_and_record.py - A Python script for managing calibrations and recordings. - streaming.py - A Python script for receiving live data from the eye-tracker - live_scene.py - A Python script for receiving live scene from the eye-tracker camera. - live_scene_and_gaze.py - A Python script for receiving live scene and synchronized gaze.