fastlater / Industrial-Datalogger-Project

Industrial DataLogger Design files and Firmware Files

Arduino : Industrial Data Logger Designing and Programing

I have designed the course for the following mentioned datalogger on Udemy, that teaches you how to design hardware and do programing for it.

Content

• Images of Datalogger
• Hardware design files and firmware files for Industrial DataLogger.
• Examples codes used in demos of all the sections of datalogger.
• hardware descreption section includes descreptions for all the hardware blocks of datalogger.
• Libraries used in demo code

Introduction

Please check the following links for demostration of Datalogger

1. Video in this link describes the entire PCB of Industrial Datalogger

https://drive.google.com/open?id=1AglGJTn_O3K_O5rFmPPeSSnq5-zFRN2F

2. Video in this link gives the demostration of each and every inetrface of Industrial Datalogger

https://drive.google.com/open?id=1-QjOal9vDFr6C30vdyRp-lrAA95-3nSr

Features

• SMPS (5V)
• LDO Regulator (3.3v)
• Relay Driver (2 CH)
• DC Motor Speed Controller
• 0-10 V Digital Input (4 CH)
• 0-10 V Analog Input (4 CH)
• 4-20 mA Receiver (2 CH)
• Real Time Clock
• Bluetooth Low Energy
• WiFi Module
• SD Card Module
• RS232 Interface
• RS485 Interface
• 6 Pin ICSP Headers
• Serial Programming using UART0