explosive2005's repositories
androidbluetoothstarter
Basic Android Bluetooth & Arduino Starter
atmega4809-getting-started-with-rtc-studio
This repository contains 3 bare metal code examples that show how to use the RTC peripheral of the ATmega4809 device in different modes. It is a companion to the TB3213-Getting Started with Real-Time Counter (RTC).
avr-libc3
A Fork of AVR-LIBC V2.0 from https://www.nongnu.org/avr-libc/
BrushCounter
toothbrush monitor
c-periphery
A C library for peripheral I/O (GPIO, SPI, I2C, MMIO, Serial) in Linux.
dht22
Wireless DHT and Nrf24 network
DigistumpArduino
Files to add Digistump support (Digispark, Pro, DigiX) to Arduino 1.6.X (1.6.5+)
esp_wifi_repeater
A full functional WiFi Repeater (correctly: a WiFi NAT Router)
Getting_Started_with_GPIO
This repository contains examples of bare metal source code for GPIO as described in TB3229 document from Microchip. The code examples were developed using ATmega4809
I2C
I2C library for C/C++
i2cdevlib
I2C device library collection for AVR/Arduino or other C++-based MCUs
megaTinyCore
Arduino core for the tinyAVR 0-series and 1-series chips
MPR121_Capacitive_Touch_Breakout
Example code and board files for MPR121 Breakout board
Pine64-CPP
C++ library for Pine64. Based on the work of Eric Ptak (@thortex) , Stefan Mavrodiev (@StefanMavrodiev), Kamil Trzcinski (@ayufan-pine64)
rpi-mpu6050
Simple C code for raspberry pi to read gyro, accelerometer, and temperature data from a mpu-6050 sensor.
RPi.GPIO-PineA64
RPi.GPIO module for Pine A64/A64+
TB3209_Getting_Started_with_ADC
This repository contains examples of bare metal source code for ADC as described in TB3209 document from Microchip. The code examples were developed using ATmega4809
TB3213_Getting_Started_with_RTC
This repository contains examples of bare metal source code for RTC as described in TB3213 document from Microchip. The code examples were developed using ATmega4809