Ben Ripka ID 1465622 Evan Perret Timms ID 1504825 Notes: Some code(along with comments) provided in class was reused indirectly throughout the assignment accessories: *1 Arduino Mega Board *1 joystick *1 LCD screen *1 SD card w/ map of edmonton+restaurant data Wiring: from bottom to top on the right side (the side with the pins). Board Pin <---> Arduino Pin =========================== GND GND Vin 5V 3Vo NOT CONNECTED CLK 52 MISO 50 MOSI 51 CS 10 D/C 9 RST NOT CONNECTED Lite NOT CONNECTED Y+ A2 (analog pin) X+ 4 (digital pin) Y- 5 (digital pin) X- A3 (analog pin) IM0 - IM3 NOT CONNECTED (they expect a 3.3v signal, DON'T CONNECT!) CCS 6 CD NOT CONNECTED =========================== Joy Pin <---> Arduino Pin =========================== GND GND 5V 5V VRx A1 VRy A0 SW 2 =========================== Instructions: 1. Insert SD card 2. Compile and upload code Features: 1.Playing board that is navigable with the joystick 2.Algorithm that places a certain number of mines based on the difficulty selected before the game begins 3.Pressing the button on the joystick will clear surrounding spaces that do not contain the mines 4.Numbers will be displayed on tiles that are adjacent to mines. The the number displayed refers to the number of adjacent mines 5.Clearing all the free spaces will result in a perfect score 6.Score is counted based on number of cleared spaces 7.At the end of the game the score will be displayed on the screen, then after certain time period it will restart. 8.Separate button for flag placement 9.'Custom' game mode which uses a potentiometer to adjust a certain number of mines 1st Milestone: v0.07 23/11/2017 -Playing Board implemented which cursor controlled by the joystick that is able to navigate the screen. Pressing the button on the cursor on top of a mine will end the game -Algorithm places mines(not based on difficulty, just set value) -Board does not clear spaces -Score function structure is present but not functional 2nd Milestone: