MQTT additional Command

[judick1962]

Version 2.0.0
What I found out so far is:

Publishing on
TOPIC/cmd

To open a door
{"doorip":"192.168.5.160","door":"2","cmd":"open"}
To close a door
{"doorip":"192.168.5.160","door":"1","cmd":"close"}
To open all doors
{"doorip":"192.168.5.160","cmd":"dooropen"}
To add a user
{"doorip":"192.168.5.160""user":"testman","uid":"22222","cmd":"adduser"}
To delete a user
{"doorip":"192.168.5.160","uid":"22222","cmd":"deletuid"}

What I am looking for
 {"doorip":"192.168.5.160","uid":"22222","cmd":"change","uid":"22222","door":"1","access":"Admin","since":"1713360552","until":"1713360552"}

Adding a user without changing the access-rights per door is not helping me in order to remote manage temporarily user or did
I overlook something?

Thanks for considering

Joe

[Matteo Giaccone]

Hey @judick1962 have you considered deleting and re-adding the user?

Another approach for temporary users is to add users already with both validsince and validuntil dates. Have you seen this page for the documentation: https://github.com/esprfid/esp-rfid/blob/dev/README-MQTT.md

It's about the dev branch though. You should be able to use it also with the v2.0.0.rc0 that you can find here: https://github.com/esprfid/esp-rfid/releases/tag/2.0.0.rc0 (soon I'll probably release a new rc1).

Hope this helps!