Giters
espressif
/
openocd-esp32
OpenOCD branch with ESP32 JTAG support
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
351
Watchers:
35
Issues:
304
Forks:
129
espressif/openocd-esp32 Issues
usb-jtag OpenOCD error on esp32c6 (devkit) restart with on-board button (RST) (OCD-907)
Closed
4 months ago
Comments count
7
ESP32H2 new project template does not work with JTAG/USB (for flashing and debugging). Something missing. BLINK demo code do work. (OCD-936)
Closed
5 months ago
Comments count
18
Change partition table offset, OpenOCD fails (IDFGH-12364) (OCD-927)
Closed
5 months ago
Comments count
9
ESP32 - QIO flash configuration vs software breakpoints (OCD-940)
Updated
5 months ago
Comments count
8
ESP32-C6 - gdb requested a non-existing register (reg_num=73) when debugging from VS Code (OCD-939)
Closed
5 months ago
Comments count
2
Unable to halt ESP32S3 using FTDI debug probe (OCD-937)
Closed
5 months ago
Comments count
5
OpenOCD target for ESP32-C6 is missing RISC-V CSRs (IDFGH-12420) (OCD-930)
Closed
6 months ago
Comments count
6
ESP32S3 Espressif sysview with FreeRTOS multicore does not work (IDFGH-11368) (OCD-871)
Closed
7 months ago
Comments count
6
Problem programming ESP32-C2 with J-Link JTAG. Hart unexpectedly reset! (OCD-933)
Closed
6 months ago
Comments count
2
ESP32-C6 Debugging with USB-Serial-Jtag (OCD-893)
Closed
7 months ago
Comments count
31
Error: libusb_open() failed with LIBUSB_ERROR_NOT_FOUND (IDFGH-9317) (OCD-709)
Closed
2 years ago
Comments count
4
Timeout with CMSIS-DAP on ESP32 (OCD-771)
Closed
7 months ago
Comments count
22
XIAO ESP32C3 Failed to get flash maps (OCD-784)
Closed
7 months ago
Comments count
5
Launch problem with "Error: esp_usb_jtag: could not find or open device!" ESP32-C3 via USB/IP (Windows -> VM) (OCD-880)
Closed
7 months ago
Comments count
5
Error: Failed to get flash maps (-8)! (OCD-847)
Closed
9 months ago
Comments count
16
Debugging ESP32-S3 2nd Core (OCD-908)
Closed
7 months ago
Comments count
3
Start openocd faild (OCD-867)
Closed
10 months ago
Comments count
6
libusb_get_string_descriptor_ascii() failed with -9 error for JTAG Debugging ESP32S3 (OCD-731)
Closed
a year ago
Comments count
20
ESP32-C3 not mentioned in the README - intentional? (OCD-882)
Closed
8 months ago
Comments count
1
[Windows] Trace failing with error 22 on write (OCD-710)
Closed
8 months ago
Comments count
12
Debug esp32-s3 CPU1 while FreeRTOS ruining only on CPU0 (OCD-711)
Closed
8 months ago
Comments count
11
Error: can't add breakpoint: unknown reason (OCD-878)
Closed
8 months ago
Comments count
4
Failed To init Debug adapter (Failed to get flash maps, failed to get flash size) (OCD-789)
Closed
8 months ago
Comments count
4
Profiling: xtensa-esp-elf-gprof: can't find .text section in X.elf (OCD-881)
Closed
8 months ago
Comments count
4
Could not find target in FreeRTOS compatibility list error (OCD-879)
Closed
9 months ago
Comments count
9
Fail to flash by jtag (OCD-869)
Closed
9 months ago
Comments count
47
Why is Espressif ESP32 Dev Module deprecated for OpenOCD ? (OCD-734)
Closed
9 months ago
Comments count
3
Sporadic failure to read memory when OpenOCD launched in PIPE mode (OCD-743)
Closed
9 months ago
Comments count
4
Nonfunctional Launch of gbdtui, crashing and inability to debug at all (OCD-835)
Closed
9 months ago
Comments count
15
Error: xtensa_wait_algorithm: not halted 0, pc 0x4000c2f6, ps 0x60025 (OCD-877)
Closed
9 months ago
Comments count
1
esp32s3 vscode openocd debug Warn : address 0x42008342 not writable (OCD-782)
Closed
9 months ago
Comments count
3
ESP32-S3 Built-in debug not working on Seeed Studio Xiao ESP32-S3 board (OCD-876)
Closed
9 months ago
Comments count
6
Error: Target not examined yet (OCD-841)
Closed
10 months ago
Comments count
4
esp32S3 openocd "[OpenOCD] ❌ Error: libusb_get_string_descriptor_ascii() failed with -9" (IDFGH-11497) (OCD-846)
Closed
10 months ago
Comments count
1
OpenOCD timed out in Espressif-IDE (OCD-842)
Closed
a year ago
Comments count
16
Error: timed out while waiting for target halted , which with my own debugger(CH347) (OCD-824)
Closed
a year ago
Comments count
14
ESP32-S3 Openocd JTAG debugging with J-link (OCD-761)
Closed
a year ago
Comments count
3
After updated OpenOCD there is FLASH Programming Error (OCD-713)
Closed
2 years ago
Comments count
6
gdb does not show stack trace (OCD-715)
Closed
a year ago
Comments count
4
Cannot add breakpoint (OCD-740)
Closed
a year ago
Comments count
6
[esp32s3] Change cfg setting to act by default as custom appimage_offset (OCD-742)
Closed
a year ago
Comments count
6
External JTAG connection (i.e., Segger Jlink Ultra+)is not working (OCD-750)
Closed
a year ago
Comments count
7
Openocd read_bank failes to read from flash (OCD-752)
Closed
a year ago
Comments count
3
Flashing over jtag: timed out while waiting for target halted (OCD-753)
Closed
a year ago
Comments count
3
OpenOCD - GDB Session (OCD-755)
Closed
a year ago
Comments count
15
ESP32S3 JTAG USB/Serial does not print output using esp-rs/esp-println (OCD-737)
Closed
a year ago
Comments count
2
Cannot debug ESP32 through esp-usb-bridge (OCD-748)
Closed
a year ago
Comments count
5
CMSIS-DAP doesn't have hidapi support built in release (OCD-733)
Closed
a year ago
Comments count
4
error: invalid command name adapter (OCD-716)
Closed
2 years ago
Comments count
2
new version of "openocd-esp32" never works (OCD-718)
Closed
2 years ago
Comments count
10
Previous
Next