NimBLE does not work with Arduino Nano ESP32
ednieuw opened this issue · comments
Board
Arduino Nano ESP32
Device Description
The NimBLE library 1.4.2 works with de ESP32-C3-DEV and ESP32-S3-DEV boards
Hardware Configuration
No
Version
v3.0.1
IDE Name
Arduino IDE 1.0 and 2.0
Operating System
Windows 11
Flash frequency
NB Arduino settings in board
PSRAM enabled
yes
Upload speed
NB Arduino setting in board
Description
The NIMBLE library was updated to 1.4.2 to have the ESP32-S3 and C3 boards working in ESP32 3.0.
This new library version works well with these boards.
It also works well with the Arduino Nano ESP32 with the Arduino board, still using with ESP32 core 2.0.13
When I choose the Arduino Nano ESP32 on core 3.0.1 compilation and upload is without errors and the program starts but crashes without error after the BLE initialisations.
The NIMBLE example "BLE_uart" also crashes
Sketch
/* The NIMBLE example "BLE_uart"
Video: https://www.youtube.com/watch?v=oCMOYS71NIU
Based on Neil Kolban example for IDF: https://github.com/nkolban/esp32-snippets/blob/master/cpp_utils/tests/BLE%20Tests/SampleNotify.cpp
Ported to Arduino ESP32 by Evandro Copercini
Create a BLE server that, once we receive a connection, will send periodic notifications.
The service advertises itself as: 6E400001-B5A3-F393-E0A9-E50E24DCCA9E
Has a characteristic of: 6E400002-B5A3-F393-E0A9-E50E24DCCA9E - used for receiving data with "WRITE"
Has a characteristic of: 6E400003-B5A3-F393-E0A9-E50E24DCCA9E - used to send data with "NOTIFY"
The design of creating the BLE server is:
1. Create a BLE Server
2. Create a BLE Service
3. Create a BLE Characteristic on the Service
4. Create a BLE Descriptor on the characteristic
5. Start the service.
6. Start advertising.
In this example rxValue is the data received (only accessible inside that function).
And txValue is the data to be sent, in this example just a byte incremented every second.
*/
/** NimBLE differences highlighted in comment blocks **/
/*******original********
#include <BLEDevice.h>
#include <BLEServer.h>
#include <BLEUtils.h>
#include <BLE2902.h>
***********************/
#include <NimBLEDevice.h>
BLEServer *pServer = NULL;
BLECharacteristic * pTxCharacteristic;
bool deviceConnected = false;
bool oldDeviceConnected = false;
uint8_t txValue = 0;
// See the following for generating UUIDs:
// https://www.uuidgenerator.net/
#define SERVICE_UUID "6E400001-B5A3-F393-E0A9-E50E24DCCA9E" // UART service UUID
#define CHARACTERISTIC_UUID_RX "6E400002-B5A3-F393-E0A9-E50E24DCCA9E"
#define CHARACTERISTIC_UUID_TX "6E400003-B5A3-F393-E0A9-E50E24DCCA9E"
/** None of these are required as they will be handled by the library with defaults. **
** Remove as you see fit for your needs */
class MyServerCallbacks: public BLEServerCallbacks {
void onConnect(BLEServer* pServer) {
deviceConnected = true;
};
void onDisconnect(BLEServer* pServer) {
deviceConnected = false;
}
/***************** New - Security handled here ********************
****** Note: these are the same return values as defaults ********/
uint32_t onPassKeyRequest(){
Serial.println("Server PassKeyRequest");
return 123456;
}
bool onConfirmPIN(uint32_t pass_key){
Serial.print("The passkey YES/NO number: ");Serial.println(pass_key);
return true;
}
void onAuthenticationComplete(ble_gap_conn_desc desc){
Serial.println("Starting BLE work!");
}
/*******************************************************************/
};
class MyCallbacks: public BLECharacteristicCallbacks {
void onWrite(BLECharacteristic *pCharacteristic) {
std::string rxValue = pCharacteristic->getValue();
if (rxValue.length() > 0) {
Serial.println("*********");
Serial.print("Received Value: ");
for (int i = 0; i < rxValue.length(); i++)
Serial.print(rxValue[i]);
Serial.println();
Serial.println("*********");
}
}
};
void setup() {
Serial.begin(115200);
// Create the BLE Device
BLEDevice::init("UART Service");
// Create the BLE Server
pServer = BLEDevice::createServer();
pServer->setCallbacks(new MyServerCallbacks());
// Create the BLE Service
BLEService *pService = pServer->createService(SERVICE_UUID);
// Create a BLE Characteristic
pTxCharacteristic = pService->createCharacteristic(
CHARACTERISTIC_UUID_TX,
/******* Enum Type NIMBLE_PROPERTY now *******
BLECharacteristic::PROPERTY_NOTIFY
);
**********************************************/
NIMBLE_PROPERTY::NOTIFY
);
/***************************************************
NOTE: DO NOT create a 2902 descriptor
it will be created automatically if notifications
or indications are enabled on a characteristic.
pCharacteristic->addDescriptor(new BLE2902());
****************************************************/
BLECharacteristic * pRxCharacteristic = pService->createCharacteristic(
CHARACTERISTIC_UUID_RX,
/******* Enum Type NIMBLE_PROPERTY now *******
BLECharacteristic::PROPERTY_WRITE
);
*********************************************/
NIMBLE_PROPERTY::WRITE
);
pRxCharacteristic->setCallbacks(new MyCallbacks());
// Start the service
pService->start();
// Start advertising
pServer->getAdvertising()->start();
Serial.println("Waiting a client connection to notify...");
}
void loop() {
if (deviceConnected) {
pTxCharacteristic->setValue(&txValue, 1);
pTxCharacteristic->notify();
txValue++;
delay(10); // bluetooth stack will go into congestion, if too many packets are sent
}
// disconnecting
if (!deviceConnected && oldDeviceConnected) {
delay(500); // give the bluetooth stack the chance to get things ready
pServer->startAdvertising(); // restart advertising
Serial.println("start advertising");
oldDeviceConnected = deviceConnected;
}
// connecting
if (deviceConnected && !oldDeviceConnected) {
// do stuff here on connecting
oldDeviceConnected = deviceConnected;
}
}
Debug Message
None to see
Other Steps to Reproduce
The NIMBLE library was updated to 1.4.2 to have the ESP32-S3 and C3 boards working in ESP32 3.0.
This new library version works well with these boards.
It also works well with the Arduino Nano ESP32 with the Arduino board, still using with ESP32 core 2.0.13
I have checked existing issues, online documentation and the Troubleshooting Guide
- I confirm I have checked existing issues, online documentation and Troubleshooting guide.
NimBLE is an external library. Please take the issue there.