PRIME B350-PLUS
Chris1512 opened this issue · comments
According to this link
https://www.computerbase.de/forum/threads/asus-prime-b350-plus-liest-cpu-temp-falsch-aus.1922786/
the mentioned board should be supported.
The following is the the output you asked for in order to possibly provide support for the board:
`dmidecode -t baseboard
dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: PRIME B350-PLUS
Version: Rev X.0x
Serial Number: 171113947804502
Asset Tag: Default string
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Default string
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x001F, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x0024, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard IGD
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0`
Is it possible to add support?
In the hwinfo shots in the thread you link to, it can be seen that HWINFO is accessing the IT8665E chip directly, not via the WMI interface. As far as I know there are no prime x350/x370 boards with the WMI interface in their firmware.
The easiest way to check if your board has the required UEFI interface is as per: #11 (comment)