Getting touch screen to work
eklem opened this issue · comments
Identifies as:
# evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: ILITEK ILITEK-TP
/dev/input/event1: ILITEK ILITEK-TP Mouse
/dev/input/event2: SIGMACHIP USB Keyboard
/dev/input/event3: SIGMACHIP USB Keyboard Consumer Control
/dev/input/event4: SIGMACHIP USB Keyboard System Control
/dev/input/event5: vc4-hdmi-0
/dev/input/event6: vc4-hdmi-1
Select the device event number [0-6]: 1
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x222a product 0x1 version 0x110
Input device name: "ILITEK ILITEK-TP Mouse"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 272 (BTN_LEFT)
Event code 273 (BTN_RIGHT)
Event code 274 (BTN_MIDDLE)
Event code 275 (BTN_SIDE)
Event code 276 (BTN_EXTRA)
Event type 3 (EV_ABS)
Event code 0 (ABS_X)
Value 0
Min 0
Max 16384
Resolution 53
Event code 1 (ABS_Y)
Value 0
Min 0
Max 16384
Resolution 94
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
Maybe look at:
https://forums.raspberrypi.com/viewtopic.php?t=205592
Works now! Turnd the flat cable the other way again and all good. Can be calibrated through ts_calibrate
.