EtherCardOct2012
October 2012 Snapshot of Ethercard library which works with OpenEnergyMonitor MultiNode emoncms posting NanodeRF sketch. https://github.com/openenergymonitor/nanoderf
The current version of the EtherCard library seems to have broken out Multinode sketch, NanodeRF always fails to get DNS.
See forum thread: http://openenergymonitor.org/emon/node/5243
Thanks to Robert Wall for providing this library snapshot.
Source and credit (JeeLabs), latest version of library: https://github.com/jcw/ethercard
Work in progress - see http://forum.jeelabs.net/node/457
Derived from code by Guido Socher and Pascal Stang, hence under GPL2 license.
The home page for this library is http://jeelabs.org/ethercard
You can download this project in either zip or tar formats.
Unpack the archive and rename the result to EtherCard.
Put it in the libraries folder in your Arduino sketches area.
Restart the Arduino IDE to make sure it sees the new files.
Updates by Andrew Lindsay, December 2011:
-
Add alternative begin with 3rd parameter to specify CS pin to use. Only 8, 9 and 10 are usable. Default without 3rd parameter is pin 8.
-
Updated DHCP to allow broadcast packets to be received as some DHCP servers (Some Linux and Windows DHCP servers) send responses to mac address ff:ff:ff:ff:ff:ff which would otherwise be filtered out. At end of DHCP process the broadcast filter is returned to block broadcast packets. ARP broadcasts are not affected as they have their own filter.
-
Cleared up a number of Arduino 1.0 IDE warnings.
-
Experimental - commented out line 609 of tcpip.cpp to no longer terminate client connections after 1 packet has been received. This is to allow larger packets and streamed data to be received. However, this may not terminate connections correctly. It needs more work to decide if other host is wanting to close connection. To remove this feature, remove the comment characters // on line 609.