No module enabled at startup
amritabithi opened this issue · comments
Hello,
I am not used to building projects with Python and after following the installation instructions I am only left with the same folder I initially downloaded with no additional files, and then when trying to run 'dronesploit' as a command I cannot get this to recognize anything in any of the folders, I just get the error message:
dronesploit: command not found
I beieve I have installed all of the dependencies as well before trying the test run / building.
Is there some kind of expicit command to bulid this project assuming the environment does not have any assumptions about buliding like env variables, etc? I have asked this same questions to a couple of other projects also that I had to pause because I cannot figure out how to build them, so if the installations steps could be more verbose that would be great, as I see a lot of other people lost also on this question, but nobody has been able to answer it yet at least on these other projects I was trying to run.
( The one-line install scripts are visually tidy and nice but I think anybody who is missing a certain dependency or environment variable is never able to run things like composer packages or this Python package because we do not know what to start and there are no answers because it is "too simple" of a question maybe? )
How to run the drone spoilt there is no proper instructions guide !!
There is a more detailed overview of the commands in the /docs folder that you can view here - https://github.com/dhondta/dronesploit/blob/master/docs/quickstart.md
In that page there is a section on the --help command that explains how to use it for the different commands, as I think you can basically type something like "dronesploit scan --help" and get help on scanning as a made up example since I have not used it yet. Here is the link to that section in the same page - https://github.com/dhondta/dronesploit/blob/master/docs/quickstart.md#2-getting-help
( Or to put it simply you can use the help command from different places in the dronesploit program and it will show help for the part of the program or command you are currently using. )
Hi @amritabithi
Hello,
I am not used to building projects with Python and after following the installation instructions I am only left with the same folder I initially downloaded with no additional files, and then when trying to run 'dronesploit' as a command I cannot get this to recognize anything in any of the folders, I just get the error message:
dronesploit: command not found[...]
Did you pip install dronesploit ? This installs every dependency but also the console script. Basically, the error you get occurs because this script was not installed.
Hi @ronny530
How to run the dronesploit there is no proper instructions guide !!
This is an open issue ; documentation is indeed the stumbling stone of this project, but I'm struggling to find time to improve this.
I apologize for that...
As @amritabithi mentioned, the quick start tells you the most important things you need to know as a user. The documentation mostly lacks for developers.
Hi @ronny530
How to run the dronesploit there is no proper instructions guide !!
This is an open issue ; documentation is indeed the stumbling stone of this project, but I'm struggling to find time to improve this. I apologize for that... As @amritabithi mentioned, the quick start tells you the most important things you need to know as a user. The documentation mostly lacks for developers.
Thank you so much! I started from scratch and just ran:
pip install dronesploit
And now when I type the command 'dronesploit' it starts up and I see the welcome screen.
Before I was using the command "pip3 install dronesploit" which it shows on the page at https://github.com/dhondta/dronesploit and for some reason the "pip3" version wasn't working on my system, but just plain "pip" does.
It does seem however that none of the commands work for using a module and all modules come disabled, with no information on how to enable them.
Using "show options" within a project throws the exception "Borderless table not defined."
Trying to use any module throws the exception: "KeyError(find_targets)"
I have it on my other computer so it is hard to copy and paste exactly but it does seem broken on:
/.local/lib/python3.8/site-packages/tinyscript/helpers/dictionaries.py on line 305 in getitem
Please provide the output of the following commands :
$ pip show tinyscript | grep Version
$ pip show dronesploit | grep Version
NB: Or pip3 if relevant...
Please provide the output of the following commands :
$ pip show tinyscript | grep Version $ pip show dronesploit | grep VersionNB: Or
pip3if relevant...
Thank you for your response, here are my versions first, and I just did a fresh installation of dronesploit using the pip command installer.
[14:20:56] amrita:~$ pip show tinyscript | grep Version
Version: 1.24.12
[14:21:13] amrita:~$ pip show dronesploit | grep Version
Version: 1.1.5
I did a fresh install of dronesploit using the command "pip3 install dronesploit" , and then started up dronesploit and tried to issue the command "use stop_video" to see if I could enable a module, but I ran in to the same error that I get for each command which is the 'keyerror' exception shown at the bottom of the stack trace below.
I also ran "show modules" and they all show as not enabled by default. Below is my output from starting and then running the 'use stop_video' command:
[!] There are some issues ; use 'show issues' to see more details
dronesploit > use stop_video
[-] ('stop_video',)
Traceback (most recent call last):
File "/home/amrita/.local/lib/python3.8/site-packages/tinyscript/helpers/dictionaries.py", line 302, in __getitem__
raise AttributeError
AttributeError
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/amrita/.local/lib/python3.8/site-packages/sploitkit/core/console.py", line 361, in run
obj.run(*args)
File "/home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/module.py", line 41, in run
new_mod, old_mod = Module.get_modules(module), self.module
File "/home/amrita/.local/lib/python3.8/site-packages/sploitkit/core/module.py", line 135, in get_modules
return cls.modules[path or ""]
File "/home/amrita/.local/lib/python3.8/site-packages/tinyscript/helpers/dictionaries.py", line 305, in __getitem__
raise KeyError(parts)
KeyError: ('stop_video',)
dronesploit >
Hi @amritabithi
Arf, this indicates indeed that the command does not exist. Note that I should definitely handle this exception in a nice-looking colored error for the sake of visibility as it does not come from tinyscript/helpers/dictionaries.py anyway but well from SploitKit while loading the registry of available modules. It may come from the install folder that is not handled in a right way, therefore not pointing the Module class to the right location for loading modules.
Normally, you should see (unless you already plugged a WiFi antenna ; in this case, you should get auxiliary modules to be enabled) :
Way ahead :
- From the help, you can see the
--devand--verboseoptions ; please enable both as it will show the details about loading the modules.
┌──(kali㉿kali)-[~/Desktop]
└─$ dronesploit --help
Dronesploit 1.1.5
Author : Alexandre D'Hondt (alexandre.dhondt@gmail.com)
Copyright: © 2019-2020 A. D'Hondt
License : GNU Affero General Public License v3.0
Dronesploit framework's launcher script.
usage: dronesploit [--dev] [-h] [--help] [-v]
optional arguments:
--dev development mode (default: False)
extra arguments:
-h show usage message and exit
--help show this help message and exit
-v, --verbose verbose mode (default: False)
- Please copy-paste the log messages displaying right after the logo before displaying the prompt. You should get something like :
[...]
00:00:01.121 core.entity DEBUG Loading Python source: /home/kali/.local/lib/python3.9/site-packages/sploitkit/base/models
00:00:01.123 core.entity DETAIL Registered model 'user'
00:00:01.124 core.entity DETAIL Registered model 'email'
00:00:01.124 core.entity DETAIL Registered model 'password'
00:00:01.124 core.entity DETAIL Registered basemodel 'user_email'
[...]
We are interested in the "Loading Python source" DEBUG messages.
Here is the full output from starting with the --dev and --verbose flags:
00:00:01.065 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/models
00:00:01.068 core.entity DETAIL Registered model 'user'
00:00:01.069 core.entity DETAIL Registered model 'email'
00:00:01.070 core.entity DETAIL Registered model 'password'
00:00:01.071 core.entity DETAIL Registered basemodel 'user_email'
00:00:01.071 core.entity DETAIL Registered basemodel 'user_password'
00:00:01.072 core.entity DETAIL Registered model 'organization'
00:00:01.073 core.entity DETAIL Registered model 'unit'
00:00:01.074 core.entity DETAIL Registered model 'employee'
00:00:01.074 core.entity DETAIL Registered basemodel 'employee_unit'
00:00:01.075 core.entity DETAIL Registered basemodel 'employee_email'
00:00:01.076 core.entity DETAIL Registered basemodel 'employee_user'
00:00:01.077 core.entity DETAIL Registered model 'host'
00:00:01.078 core.entity DETAIL Registered model 'port'
00:00:01.079 core.entity DETAIL Registered model 'service'
00:00:01.079 core.entity DETAIL Registered basemodel 'host_port'
00:00:01.080 core.entity DETAIL Registered basemodel 'service_port'
00:00:01.081 core.entity DETAIL Registered model 'note'
00:00:01.082 core.entity DETAIL Registered basemodel 'organization_note'
00:00:01.083 core.entity DETAIL Registered basemodel 'note_host'
00:00:01.084 core.entity DETAIL Registered basemodel 'note_user'
00:00:01.102 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/session.py
00:00:01.103 core.entity DETAIL Registered console 'session_console'
00:00:01.103 core.entity DETAIL Registered command 'background'
00:00:01.104 core.entity DETAIL Registered command 'session'
00:00:01.104 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/module.py
00:00:01.105 core.entity DETAIL Registered console 'module_console'
00:00:01.105 core.entity DETAIL Registered command 'use'
00:00:01.105 core.entity DETAIL Registered command 'module_command'
00:00:01.106 core.entity DETAIL Registered command 'run'
00:00:01.107 core.entity DETAIL Registered command 'show'
00:00:01.107 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/project.py
00:00:01.107 core.entity DETAIL Registered console 'project_console'
00:00:01.108 core.entity DETAIL Registered command 'root_command'
00:00:01.109 core.entity DETAIL Registered command 'project_root_command'
00:00:01.110 core.entity DETAIL Registered command 'archive'
00:00:01.110 core.entity DETAIL Registered command 'delete'
00:00:01.111 core.entity DETAIL Registered command 'load'
00:00:01.112 core.entity DETAIL Registered command 'select'
00:00:01.113 core.entity DETAIL Registered command 'show'
00:00:01.114 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/root.py
00:00:01.115 core.entity DETAIL Registered command 'help'
00:00:01.115 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/recording.py
00:00:01.116 core.entity DETAIL Registered command 'record_status'
00:00:01.117 core.command DETAIL Registered command alias 'record'
00:00:01.118 core.entity DETAIL Registered command 'root_project_command'
00:00:01.119 core.entity DETAIL Registered command 'record'
00:00:01.120 core.entity DETAIL Registered command 'replay'
00:00:01.121 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/utils.py
00:00:01.122 core.entity DETAIL Registered command 'edit'
00:00:01.124 core.entity DETAIL Registered command 'history'
00:00:01.125 core.entity DETAIL Registered command 'shell'
00:00:01.127 core.entity DETAIL Registered command 'stats'
00:00:01.128 core.entity DETAIL Registered command 'debug_command'
00:00:01.131 core.entity DETAIL Registered command 'logs'
00:00:01.133 core.entity DETAIL Registered command 'pydbg'
00:00:01.135 core.entity DETAIL Registered command 'state'
00:00:01.137 core.entity DETAIL Registered command 'dev_command'
00:00:01.139 core.entity DETAIL Registered command 'collect'
00:00:01.141 core.entity DETAIL Registered command 'dict'
00:00:01.143 core.entity DETAIL Registered command 'memory'
00:00:01.143 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/sploitkit/base/commands/general.py
00:00:01.146 core.entity DETAIL Registered command 'back'
00:00:01.148 core.entity DETAIL Registered command 'exit'
00:00:01.148 core.command DETAIL Registered command alias 'quit'
00:00:01.150 core.entity DETAIL Registered command 'help'
00:00:01.150 core.command DETAIL Registered command alias '?'
00:00:01.152 core.entity DETAIL Registered command 'search'
00:00:01.155 core.entity DETAIL Registered command 'show'
00:00:01.157 core.entity DETAIL Registered command 'set'
00:00:01.159 core.entity DETAIL Registered command 'unset'
00:00:01.163 core.entity DETAIL Registered command 'setg'
00:00:01.166 core.entity DETAIL Registered command 'unsetg'
00:00:01.166 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/dronesploit/__init__.py
00:00:01.167 core.entity DETAIL Registered console 'dronesploit_console'
00:00:01.167 core.entity DEBUG Loading Python source: /home/amrita/.local/lib/python3.8/site-packages/dronesploit/_src
00:00:01.171 core.entity DETAIL Registered command 'state'
00:00:01.174 core.entity DETAIL Registered module 'wifi_module'
00:00:01.175 core.entity DETAIL Registered module 'wifi_attack_module'
00:00:01.177 core.entity DETAIL Registered command 'connect'
00:00:01.183 core.entity DETAIL Registered command 'disconnect'
00:00:01.188 core.entity DETAIL Registered command 'password'
00:00:01.191 core.entity DETAIL Registered command 'scan'
00:00:01.197 core.entity DETAIL Registered command 'targets'
00:00:01.201 core.entity DETAIL Registered command 'toggle'
00:00:01.203 core.entity DETAIL Registered module 'wpa2psk_crack'
00:00:01.204 core.entity DETAIL Registered module 'deauth'
00:00:01.205 core.entity DETAIL Registered module 'deauth_any'
00:00:01.207 core.entity DETAIL Registered module 'sniff_module'
00:00:01.208 core.entity DETAIL Registered module 'find_ssids'
00:00:01.209 core.entity DETAIL Registered module 'find_targets'
00:00:01.211 core.entity DETAIL Registered module 'drone_module'
00:00:01.213 core.entity DETAIL Registered module 'dji_module'
00:00:01.215 core.entity DETAIL Registered module 'tello_module'
00:00:01.216 core.entity DETAIL Registered module 'change_ap_password'
00:00:01.217 core.entity DETAIL Registered module 'change_ap_ssid'
00:00:01.220 core.entity DETAIL Registered module 'emergency_stop'
00:00:01.222 core.entity DETAIL Registered module 'get_sys_info'
00:00:01.224 core.entity DETAIL Registered module 'land'
00:00:01.226 core.entity DETAIL Registered module 'takeoff'
00:00:01.230 core.entity DETAIL Registered module 'hobbico_module'
00:00:01.231 core.entity DETAIL Registered module 'cme_module'
00:00:01.234 core.entity DETAIL Registered module 'cme_update_module'
00:00:01.236 core.entity DETAIL Registered module 'flitt_module'
00:00:01.238 core.entity DETAIL Registered module 'flitt_command_module'
00:00:01.240 core.entity DETAIL Registered module 'change_datetime'
00:00:01.242 core.entity DETAIL Registered module 'change_ap_password'
00:00:01.244 core.entity DETAIL Registered module 'change_ap_ssid'
00:00:01.249 core.entity DETAIL Registered module 'get_sys_info'
00:00:01.251 core.entity DETAIL Registered module 'power_off'
00:00:01.255 core.entity DETAIL Registered module 'stop_video'
00:00:01.258 core.entity DETAIL Registered module 'change_datetime'
00:00:01.261 core.entity DETAIL Registered module 'change_ap_password'
00:00:01.264 core.entity DETAIL Registered module 'change_ap_ssid'
00:00:01.267 core.entity DETAIL Registered module 'get_sys_info'
00:00:01.270 core.entity DETAIL Registered module 'power_off'
00:00:01.273 core.entity DETAIL Registered module 'stop_video'
00:00:01.277 core.entity DETAIL Registered module 'firmware_update'
00:00:01.280 core.entity DETAIL Registered module 'firmware_dos'
00:00:01.284 core.entity DETAIL Registered module 'telnet_dos'
00:00:01.290 core.command DETAIL Unregistered command 'module/module-command'
00:00:01.291 core.command DETAIL Unregistered command 'root/root-command'
00:00:01.291 core.command DETAIL Unregistered command 'root/project-root-command'
00:00:01.291 core.command DETAIL Unregistered command 'project/root-project-command'
00:00:01.291 core.command DETAIL Unregistered command 'general/debug-command'
00:00:01.291 core.command DETAIL Unregistered command 'general/dev-command'
00:00:01.294 core.module DETAIL Unregistered module 'auxiliary/wifi/wifi_module'
00:00:01.294 core.module DETAIL Unregistered module 'auxiliary/wifi/wifi_attack_module'
00:00:01.294 core.module DETAIL Unregistered module 'auxiliary/wifi/sniff_module'
00:00:01.294 core.module DETAIL Unregistered module 'None/drone_module'
00:00:01.295 core.module DETAIL Unregistered module 'None/dji_module'
00:00:01.295 core.module DETAIL Unregistered module 'command/dji/tello/tello_module'
00:00:01.295 core.module DETAIL Unregistered module 'None/hobbico_module'
00:00:01.295 core.module DETAIL Unregistered module 'command/hobbico/cme/cme_module'
00:00:01.296 core.module DETAIL Unregistered module 'exploit/hobbico/cme/cme_update_module'
00:00:01.296 core.module DETAIL Unregistered module 'exploit/hobbico/flitt/flitt_module'
00:00:01.296 core.module DETAIL Unregistered module 'command/hobbico/flitt/flitt_command_module'
-=[ 5 auxiliary (5 disabled) ]=-
-=[ 18 command (18 disabled) ]=-
-=[ 3 exploit (3 disabled) ]=-
[!] There are some issues ; use 'show issues' to see more details
[#] Starting DronesploitConsole[139890070168672]
dronesploit >
OK, in the current state, I see that all the modules are loaded but disabled at startup, meaning that requirements are not satisfied.
Can you please also give the output of the command "show issues" ?
I think that you don't have any required tool that the modules rely on. For instance, is aircrack-ng installed on your system ?
I installed aircrack-ng and that opened up the modules to be available, and I am now able to explore the commands and use them. I still need to learn how the modules work and things but it appears to all be working now..
For other people that need to install aircrack-ng on Ubuntu, do not follow the aircrack-ng repository's instructions as they point to a missing or outdated version on their page, use this generic command with the additional version information removed:
sudo apt-get install aircrack-ng
( Also here is the output of the "show issues" command in case this is still helpful )
[!] There are some issues ; use 'show issues' to see more details
dronesploit > show issues
Modules: Deauth, DeauthAny, FindSsids, FindTargets, Wpa2pskCrack
- At least one interface in monitor mode is required
dronesploit >
Thank you again for the help!!!
I added a warning on the README related to this issue.
Thank you for your kind collaboration.