PiNode-XMR

SBC Plug and Play Monero Node. Auto-boot, Auto-update and WebUI

To Use - Unzip and write Image to Micro SD (recommended 128GB Micro SD) insert into Pi and Power on.

The Pi will boot and adapt itself to your SD card size. During this process it will self restart allowing 20 seconds for partitions to settle to where they should be.

After 2 mins from power on the node should have started.

To interact with it you'll just need it's IP address and then navigate to it from your web browser (Chrome works well. And tips for how to find the IP address can be found on the Raspberry Pi website https://www.raspberrypi.org/documentation/remote-access/ip-address.md)

To Login using the Web based terminal use:

User: pinodexmr Passwd: PiNodeXMR

*Or SSH on port 22

That's it. PiNodeXMR up and running. Once synced connect your Monero GUI with IP and Port 18081. The Web-UI is available from any device on your network PC/smartphone/tablet.

_________________________________________________________

Below is for info on its build...

Create root user and PiNodeXMR user root and pi set to 9WNN5FPAlsmUzyLZ

set pinodexmr sudo no password access in

sudo visudo

pinodexmr ALL = NOPASSWD: ALL

Dependencies

sudo apt-get install apache2 php7.0 libapache2-mod-php7.0 mysql-server mysql-client php7.0-mysql git tor tor-arm screen shellinabox fail2ban ufw -y

crontab - added - most are commands outputting to txt files for Web UI to read - All run once per minute unless otherwise stated

crontab -e

* * * * * /home/pinodexmr/temp.sh #Output CPU temp to /var/www/html/

* 4 * * * /home/pinodexmr/df-h.sh #Runs every 4 hours #Output SD card storage to /var/www/

* * * * * /home/pinodexmr/free-h.sh #Output RAM usage to /var/www/html/

* * * * * /home/pinodexmr/monero-status.sh #Output of ./monerod status to /var/www/html/

* * * * * /home/pinodexmr/node_version.sh #Output of ./monerod version to /var/www/html/

* * * * * /home/pinodexmr/print_cn.sh #Output of ./monerod print-cn to /var/www/html/

* * * * * /home/pinodexmr/print_pl.sh

* * * * * /home/pinodexmr/print_pl_stats.sh

* * * * * /home/pinodexmr/TXPool-short-status.sh

* * * * * /home/pinodexmr/TXPool-status.sh

* * * * * /home/pinodexmr/TXPool-verbose-status.sh

* * * * 0 /home/pinodexmr/Updater.sh #Runs weekly #Explained below

#UPDATER = Downloads https://raw.githubusercontent.com/shermand100/pinode-xmr/master/xmr-new-ver.sh which contains a file with the new arm7 monerod version number ONLY. Updater script then compares this number with it's current version and only if the new version number is higher it: Stops node -> Deletes current version and directory /home/pinodexmr/monero/ -> Creates new monero directory -> downloads new Monerod from https://downloads.getmonero.org/cli/linuxarm7 -> unpacks to /monero/ dir and starts updated node -> updates new version number -> deletes downloaded files -> repeats weekly.

disabled ipv6 ( otherwise confused response from HOSTNAME command for IP address )

sudo nano /boot/cmdline.txt

ipv6.disable=1

Swap file disabled - perhaps help preserve data on power loss

sudo dphys-swapfile swapoff sudo dphys-swapfile uninstall sudo update-rc.d dphys-swapfile remove

Auto boot running Monerod, edited sudo nano /etc/rc.local

su pinodexmr -c '/home/pinodexmr/boot.sh &'

UFW setup

ufw allow 80 ufw allow 443 ufw allow 18080 ufw allow 18081 ufw allow 4200 ufw allow 22 ufw enable

ssh Root ssh login disabled, only user 'pinodexmr' allowed.

dfg3hz5zqtwz46hw6 / pinode-xmr