denisov0gleb / autoclaves

Chemical autoclaves from polypropelene (PP)

Autoclaves

OpenSCAD file to generate autoclaves for 3D printing by polypropylene.

Keep generated STL files in STLs folder.

Capabilities

You can specify autoclave volume (in microliters) and/or inside cavity diameter (in millimeters).

All wall thickness are required.

Single autoclave

Examples:

1. Both volume and diameter are given:

autoclave(volume=1000, d=12.408, bottom=5, top=5, wall=5);

2. Only volume is given, diameter is calculated:

autoclave(volume=1000, bottom=5, top=5, wall=5);

3. Only diameter is given, volume is calculated:

autoclave(d=12.408, bottom=5, top=5, wall=5);

3x3 autoclave

Additional distance separator delta. By default delta = 1.

1. Only volume is given, diameter is calculated, delta is changed:

autoclave_3x3(volume=1000, bottom=5, top=5, wall=5, delta=2);

2. Only volume is given, diameter is calculated, delta is default:

autoclave_3x3(volume=1000, bottom=5, top=5, wall=5);

Squared nxn autoclave

n - number of autoclaves in each row. By default n = 2.

Additional distance separator delta. By default delta = 1.

1. Only volume is given, diameter is calculated, n and delta are default:

autoclave_nxn(volume=1000, bottom=5, top=5, wall=5);

2. Only volume is given, diameter is calculated, delta is default:

autoclave_nxn(volume=1000, bottom=5, top=5, wall=5, n=5);