Hardware Abstraction Layer crates for the ESP32, ESP32-C2, ESP32-C3, ESP32-S2, and ESP32-S3 from Espressif.
These HALs are no_std
; if you are looking for std
support, please use esp-idf-hal instead.
This project is still in the early stages of development, and as such there should be no expectation of API stability. A significant number of peripherals currently have drivers implemented (you can see a full list here) but have varying levels of functionality. For most basic tasks, this should be usable already.
If you have any questions, comments, or concerns, please open an issue, start a new discussion, or join us on Matrix. For additional information regarding any of the crates in this repository, please refer to the crate's README.
Crate | Target | Technical Reference Manual |
---|---|---|
esp32-hal | xtensa-esp32-none-elf |
ESP32 |
esp32c2-hal | riscv32imc-unknown-none-elf |
ESP32-C2 |
esp32c3-hal | riscv32imc-unknown-none-elf |
ESP32-C3 |
esp32s2-hal | xtensa-esp32s2-none-elf |
ESP32-S2 |
esp32s3-hal | xtensa-esp32s3-none-elf |
ESP32-S3 |
We recommend using cargo-generate and esp-template in order to generate a new project with all the required dependencies and configuration:
$ cargo install cargo-generate
$ cargo generate --git https://github.com/esp-rs/esp-template
For more information on using this template, please refer to its README.
There are a number of other crates within the esp-rs organization which can be used in conjunction with esp-hal
:
Crate | Description |
---|---|
esp-alloc | A simple no_std heap allocator |
esp-backtrace | Backtrace support for bare-metal applications |
esp-println | Provides print! and println! implementations |
esp-storage | Implementation of embedded-storage traits to access unencrypted flash memory |
The Minimum Supported Rust Versions are:
1.65.0
for RISC-V devices (ESP32-C2, ESP32-C3)1.65.0
for Xtensa devices (ESP32, ESP32-S2, ESP32-S3)1.67.0
for allasync
examples (embassy_hello_world
,embassy_wait
, etc.)
Note that targeting the Xtensa ISA currently requires the use of the esp-rs/rust compiler fork. The esp-rs/rust-build repository has pre-compiled release artifacts for most common platforms, and provides installation scripts to aid you in the process.
RISC-V is officially supported by the official Rust compiler.
We provide a simple pre-commit
hook to verify the formatting of each package prior to committing changes. This can be enabled by placing it in the .git/hooks/
directory:
$ cp pre-commit .git/hooks/pre-commit
When using this hook, you can choose to ignore its failure on a per-commit basis by committing with the --no-verify
flag; however, you will need to be sure that all packages are formatted when submitting a pull request.
Licensed under either of:
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.