Max current lower than expected
SnowDrifterr opened this issue · comments
BBSHD
Current FW version 1.3.1
MCU IAP15W4K61S4
Eggrider display
Noted that my unit still seems to be limited to 30 amps. When reading power draw through the display, it caps out at 28.5a.
I have 33a set as the limit in the tool
I've closed the program and read it back from the controller and validated that it is, in fact, set to 33a
Measured the current with an external gauge
I can confirm actual current limit is aligned with set current limit
However, the display is inaccurate.
Not sure if it's an eggrider thing or a quirk of software. Will leave this open until someone sees fit to close
No idea, current is passed through to display in units of 1/2 A. Read by ADC connected to motor control MCU, it's not capped by this firmware. Firmware has not been tested with erggrider by me so cannot help you sorry