Installing required packages failed!
kobzzon opened this issue · comments
/=======================================================
| ~~~~~~~~~~~~~~~~~ [ KIAUH ] ~~~~~~~~~~~~~~~~~ |
| Klipper Installation And Update Helper |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
=======================================================/
Initializing Klipper installation ...
/=======================================================
| Please select your preferred Python version. |
| The recommended version is Python 3.x. |
|---|
| 1) [Python 3.x] (recommended) |
| 2) [Python 2.7] (legacy) |
| ------------------------------------------------------- |
| B) « Back |
| =======================================================/ |
Select Python version: 1
[➔] Python 3.x
/=======================================================
| Please select the number of Klipper instances to set |
| up. The number of Klipper instances will determine |
| the amount of printers you can run from this host. |
| |
| WARNING: |
| Setting up too many instances may crash your system. |
|---|
| B) « Back |
| =======================================================/ |
Number of Klipper instances to set up: 1
[➔] Instance count: 1
Installing single Klipper instance ...
Checking for the following dependencies:
● git
[✓ OK] Dependencies already met!
Cloning Klipper from https://github.com/Klipper3d/klipper ...
Cloning into '/home/klipper/klipper'...
remote: Enumerating objects: 41434, done.
remote: Total 41434 (delta 0), reused 0 (delta 0), pack-reused 41434
Receiving objects: 100% (41434/41434), 103.99 MiB | 1.90 MiB/s, done.
Resolving deltas: 100% (32035/32035), done.
Checking out files: 100% (1815/1815), done.
Already on 'master'
Your branch is up to date with 'origin/master'.
Reading dependencies...
virtualenv
python3-dev
libffi-dev
build-essential
libncurses-dev
libusb-dev
avrdude
gcc-avr
binutils-avr
avr-libc
stm32flash
libnewlib-arm-none-eabi
gcc-arm-none-eabi
binutils-arm-none-eabi
libusb-1.0
pkg-config
dfu-util
Updating package lists...
Hit:1 http://ftp.debian.org/debian buster InRelease
Reading package lists... Done
Installing required packages...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libusb-1.0-0' for regex 'libusb-1.0'
Note, selecting 'libusb-1.0-0-dev' for regex 'libusb-1.0'
Note, selecting 'libusb-1.0-doc' for regex 'libusb-1.0'
avr-libc is already the newest version (1:2.0.0+Atmel3.6.1-2).
avrdude is already the newest version (6.3-20171130+svn1429-2).
binutils-arm-none-eabi is already the newest version (2.31.1-12+11).
binutils-avr is already the newest version (2.26.20160125+Atmel3.6.1-4).
build-essential is already the newest version (12.6).
dfu-util is already the newest version (0.9-1).
gcc-arm-none-eabi is already the newest version (15:7-2018-q2-6).
gcc-avr is already the newest version (1:5.4.0+Atmel3.6.1-2).
libffi-dev is already the newest version (3.2.1-9).
libusb-dev is already the newest version (2:0.1.12-32).
libusb-1.0-0 is already the newest version (2:1.0.22-2).
libusb-1.0-0-dev is already the newest version (2:1.0.22-2).
libusb-1.0-doc is already the newest version (2:1.0.22-2).
libncurses-dev is already the newest version (6.1+20181013-2+deb10u2).
pkg-config is already the newest version (0.29-6).
virtualenv is already the newest version (15.1.0+ds-2+deb10u1).
python3-dev is already the newest version (3.7.3-1).
stm32flash is already the newest version (0.5-1+b1).
The following additional packages will be installed:
libstdc++-arm-none-eabi-newlib
Suggested packages:
libnewlib-doc
The following NEW packages will be installed:
libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/143 MB of archives.
After this operation, 1218 MB of additional disk space will be used.
(Reading database ... 28126 files and directories currently installed.)
Preparing to unpack .../libnewlib-arm-none-eabi_3.1.0.20181231-1_all.deb ...
Unpacking libnewlib-arm-none-eabi (3.1.0.20181231-1) ...
dpkg: error processing archive /var/cache/apt/archives/libnewlib-arm-none-eabi_3.1.0.20181231-1_all.deb (--unpack):
cannot copy extracted data for './usr/lib/arm-none-eabi/newlib/thumb/v6-m/libc.a' to '/usr/lib/arm-none-eabi/newlib/thumb/v6-m/libc.a.dpkg-new': failed to write (No space left on device)
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Preparing to unpack .../libstdc++-arm-none-eabi-newlib_15%3a7-2018-q2-5+12_all.deb ...
Unpacking libstdc++-arm-none-eabi-newlib (15:7-2018-q2-5+12) ...
dpkg: error processing archive /var/cache/apt/archives/libstdc++-arm-none-eabi-newlib_15%3a7-2018-q2-5+12_all.deb (--unpack):
cannot copy extracted data for './usr/lib/arm-none-eabi/newlib/libstdc++.a' to '/usr/lib/arm-none-eabi/newlib/libstdc++.a.dpkg-new': failed to write (No space left on device)
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
/var/cache/apt/archives/libnewlib-arm-none-eabi_3.1.0.20181231-1_all.deb
/var/cache/apt/archives/libstdc++-arm-none-eabi-newlib_15%3a7-2018-q2-5+12_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Installing required packages failed!