Printer doesn't react to klipper
EricUsingGitHub opened this issue · comments
Hey d4rk50ul1,
first of all, thank you for pointing out to the ticket 'Klippy Not Connected #9' because that helped a lot.
Like the creator of the ticket I had the same Issue with the moonracker config file:
"klippy_uds_address" is definded by default and causing the problem, that klipper can't connect to moonracker.
Now after changing that, it seems like klipper is working and recognizing the printer.
My Issue now is, that the printer doesn't react to any input of my smartphone.
It reads and displays the values in mainsail perfectly fine as far as I can tell for example bed & extruder temps are at room temperatures and the y endstop is getting triggert when moving the bed to it.
But as soon as I want to send an command for example Homing the Printer (G28) or changing Bed/Extruder temp nothing happens on the printer.
klipper will then abort the actions after the result is not happening for example no endstop gets triggert when homing.
Do you have any guess why this happens ?
I have an Artillery Genius Pro and reflashed it today (again) with the instructions of 3dprintingbeginner.
I used the config from the instuctions only changing the parameters for the bed size.
I hope someone can help me :)
Ticket can be closed.
The Issue was a bad USB Hub