Giters

crealitycloud / Creality-Cloud-RaspberryPi3

This project has been discontinued and is no longer being maintained. Users are advised to use https://github.com/crealitycloud/OctoPrint-CrealityCloud-With-Video or https://github.com/crealitycloud/OctoPrint-CrealityCloud as alternatives.

Home Page:https://www.crealitycloud.com/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

No verification code is generated

boynux opened this issue · comments

commented

Describe the bug
Follow the readme to install the service on a freshly imaged RPi (with Raspbian) after running creatlity_install command no verification code is generated.

Additionally CrealityCloud Android App has no input for verification code for RPi Printer type.

To Reproduce
Steps to reproduce the behavior:

  1. Clone this repo
  2. run sudo ./creality_install
  3. Script successfully ends without generator the verification code.

Expected behavior

  1. Verification code to be generated.
  2. Android App inputs the verification code

Desktop (please complete the following information):

  • OS: raspbian
  • Version Latest
  • Printer or Board Creality Ender3 V2
commented

Same here.

sudo ./creality_install
Please make sure the printer is running and connected to this raspberry pi.
Do you want to connect the monitor camera to the printer?
Cannot open device /dev/video0, exiting.

Usb camera was not connected!
Ignore inserting USB camera? [y/n]:
[y/n]:
y
baudrate was 115200
sudo: unable to execute /home/pi/creality-cloud-raspberrypi3/creality_raspberry/ GenerateIdentifier: No such file or directory
sudo: unable to execute /home/pi/creality-cloud-raspberrypi3/creality_raspberry/ GenerateIdentifier: No such file or directory
pi@crealitypi:~/creality-cloud-raspberrypi3/creality_raspberry $

commented

Same here!