Attempting MQTT connection...failed, rc=-2 try again in 5 seconds

Question

Attempting MQTT connection...failed, rc=-2 try again in 5 seconds

gunnicus opened this issue 6 years ago · comments

Hi, I'm using NodeMCU (ESP-12E Module). ESP8266 2.5.0-Beta1, Certificates are copied correctly.

This is the error I'm getting : Attempting MQTT connection...failed, rc=-2 try again in 5 seconds

Here is the output:

SDK:3.0.0-dev(c0f7b44)/Core:2.5.0-beta1=20499901/lwIP:STABLE-2_1_2_RELEASE/glue:1.0-4-gc434c6f/BearSSL:2398cc6
sta config unchangedscandone
wifi evt: 2
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 3
cnt

connected with OPTUSV943A48, channel 6
dhcp client start...
wifi evt: 0
......ip:192.168.0.12,mask:255.255.255.0,gw:192.168.0.1
wifi evt: 3
.Attempting MQTT connection...[hostByName] request IP for: a234567hlux1-ats.iot.us-east-1.amazonaws.com
[hostByName] Host: a234567hlux1-ats.iot.us-east-1.amazonaws.com IP: 34.206.182.75
:ref 1
BSSL: Connection will fail, no authentication method is setup:wr 250 0
:wrc 250 250 0
:ack 250
:rn 536
:rd 5, 536, 0
:rdi 536, 5
:rd 531, 536, 5
:rdi 531, 531
:c0 531, 536
:rn 1072
:rd 1072, 1072, 0
:rdi 536, 536
:c 536, 536, 1072
:rdi 536, 536
:c0 536, 536
:rn 536
:rd 536, 536, 0
:rdi 536, 536
:c0 536, 536
:rn 1072
:rd 1072, 1072, 0
:rdi 536, 536
:c 536, 536, 1072
:rdi 536, 536
:c0 536, 536
:rn 1072
:rd 1072, 1072, 0
:rdi 536, 536
:c 536, 536, 1072
:rdi 536, 536
:c0 536, 536
:rn 536
:rd 536, 536, 0
:rdi 536, 536
:c0 536, 536
:rn 525
:rd 525, 525, 0
:rdi 525, 525
:c0 525, 525
failed, rc=-2 try again in 5 seconds

Reid Kersey · Answer 1 · Fri Jan 25 2019 06:22:29 GMT+0800 (China Standard Time)

I ran into this problem myself.

Follow the guide here: http://www.fhilitski.com/2016/09/connecting-mqtt-fx-to-aws-iot/ and make sure that you can connect to your IoT cloud using MQTT.fx . (Make sure to set permissions on the certificate properly, and also be sure to activate the certificate)

Use the AWS CA1: https://www.amazontrust.com/repository/AmazonRootCA1.pem

Then uncomment the line espClient.setCACert(certificates_esp8266_bin_CA, certificates_esp8266_bin_CA_len);

Change the AmazonRootCA1.pem to a DER, then hex. Add it into your code, and you should be good to go.

CShekhar Suthar · Answer 2 · Thu Jan 31 2019 17:38:15 GMT+0800 (China Standard Time)

hey @reidkersey
I'm trying to connect with broker with this( by CA certificate ) way but getting the same " Attempting MQTT connection...failed, rc=-2 try again in 5 seconds "
I'm using CA, RSA, Key all file which you ask in .der
I tried with hex code way too but the connection is still open.

Reid Kersey · Answer 3 · Fri Feb 08 2019 07:30:54 GMT+0800 (China Standard Time)

Double check that you are using CA1. Post your code as well.

CShekhar Suthar · Answer 4 · Fri Feb 08 2019 14:11:08 GMT+0800 (China Standard Time)

hey @reidkersey
I'm using this code to connect Azure IOT Hub, I just want your confirmation that Can i connect ? or this code is only for AWS IOT!

I have generated .der file from .pem file and check this code(MQTT_x509_DER), also
I have generated .der file from .pem file and .hex code from .der file and check code(MQTT_x509_bin). but found same error.
" Attempting MQTT connection...failed, rc=-2 try again in 5 seconds "

I will share my code soon. Let me verify it once again. I feel that my privatekey.pem is not perfectly converted in key.der so can you help me on that point too
Meanwhile, please review my above sentences.

Reid Kersey · Answer 5 · Fri Feb 08 2019 14:59:44 GMT+0800 (China Standard Time)

I can only guarantee that it works with AWS, because that is all that I have tried it with, and all that I am familiar with. I also haven't reviewed the code base to see if there is any AWS specific code. That said, I don't see any obvious reasons why what works with AWS would not also work with Azure.

…

On Fri, Feb 8, 2019, 01:11 CShekhar Suthar ***@***.*** wrote: hey @reidkersey <https://github.com/reidkersey> I'm using this code to connect Azure IOT Hub, I just want your confirmation that Can i connect ? or this code is only for AWS IOT! I have generated .der file from .pem file and check this code(MQTT_x509_DER), also I have generated .der file from .pem file and .hex code from .der file and check code(MQTT_x509_bin). but found same error. " Attempting MQTT connection...failed, rc=-2 try again in 5 seconds " I will share my code soon. Let me verify it once again. Meanwhile, please review my above sentences. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#14 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AVzZXuAzBDCfWop6oUc_qgxiR6y8iWg9ks5vLRUBgaJpZM4ZdrNa> .

CShekhar Suthar · Answer 6 · Wed Feb 13 2019 21:23:05 GMT+0800 (China Standard Time)

hello @reidkersey @gunnicus @copercini
I'm testing your MQTT_x509_bin example too with HEX code of CA certificate and CRT and KEY too but getting the same error " Attempting MQTT connection...failed, rc=3 try again in 5 seconds "
can you give me same advise to connect that connection
And please try with Azure cloud (IoT HUB)

Reid Kersey · Answer 7 · Sat Feb 16 2019 02:27:21 GMT+0800 (China Standard Time)

Set the certs like this:
espClient.setCertificate(certificates_esp8266_bin_crt, certificates_esp8266_bin_crt_len); espClient.setPrivateKey(certificates_esp8266_bin_key, certificates_esp8266_bin_key_len); espClient.setCACert(certificates_esp8266_bin_CA, certificates_esp8266_bin_CA_len);

The certs should be an array that looks like this: unsigned char certificates_esp8266_bin_key[] = { 0x30, 0x82, 0x04, 0xa5, 0x02, 0x01, 0x00, 0x02, 0x82, ....};

CShekhar Suthar · Answer 8 · Mon Feb 18 2019 14:11:29 GMT+0800 (China Standard Time)

Set the certs like this:
espClient.setCertificate(certificates_esp8266_bin_crt, certificates_esp8266_bin_crt_len); espClient.setPrivateKey(certificates_esp8266_bin_key, certificates_esp8266_bin_key_len); espClient.setCACert(certificates_esp8266_bin_CA, certificates_esp8266_bin_CA_len);

The certs should be an array that looks like this: unsigned char certificates_esp8266_bin_key[] = { 0x30, 0x82, 0x04, 0xa5, 0x02, 0x01, 0x00, 0x02, 0x82, ....};

Hey @reidkersey
I already used that way too and I mention that in my previous message that:
"""
Serial.println( espClient.setCACert(certificates_esp8266_bin_CA, certificates_esp8266_bin_CA_len));
Serial.println( espClient.setCertificate(certificates_esp8266_bin_crt, certificates_esp8266_bin_crt_len));
Serial.println( espClient.setPrivateKey(certificates_esp8266_bin_key, certificates_esp8266_bin_key_len));
"""
I get all three respond "True" from espClient.setCACert(), espClient.setCertificate(), espClient.setPrivateKey()

but next I get that error " Attempting MQTT connection... ESPnodemcu failed, rc=3 try again in 5 seconds.

Diogo Vigo · Answer 9 · Thu Feb 21 2019 00:53:12 GMT+0800 (China Standard Time)

Hey, I'm having the same issues when trying to connect to AWS.

Can you share your ESP8266 Configuration? (Upload speed, etc.) I don't see any other problem, I've been trying to do this for quite a while.

Thank you

CShekhar Suthar · Answer 10 · Thu Feb 21 2019 15:07:28 GMT+0800 (China Standard Time)

Hey, I'm having the same issues when trying to connect to AWS.
Can you share your ESP8266 Configuration? (Upload speed, etc.) I don't see any other problem, I've been trying to do this for quite a while.

Thank you

@DiogoVigo

Board : -> NODEMCU 1.0 (ESP - 12E Module)
Flash Size: -> 4M (1M SPIFFS)
CPU Frequency: -> 80/ 160 MHz ( use both )
Debug Port: -> Disabled
Debug Level: -> SSL/ TLS_MEM/ SSL+TLS_MEM (use all three)
lwP Variant: -> v2 Lower Memory
VTables: -> Flash
Upload Speed: -> 115200
Erase Flash: -> Only Sketch
Port: -> /dev/ttyU...

update back here if you got any path or solution to publish the data

Aqsa44 · Answer 11 · Tue Mar 05 2019 13:01:00 GMT+0800 (China Standard Time)

I have faced the above issue but after using the help from this tutorial finally I am able to sort out all the issues
https://raphberube.com/blog/2019/02/18/Making-the-ESP8266-work-with-AWS-IoT.html ..

Noah Coad · Answer 12 · Mon Sep 30 2019 13:47:32 GMT+0800 (China Standard Time)

Help plz. I'm getting this same "rc=-2" error. I'm using the most recent example, and a set of certs converted to DEM that I've tested, it's connecting to wifi and loading the private key and certs fine, but then showing this error.

Here is my code: mqtt_x509_DER.ino.txt

And the console log output: log.txt

I'm able to test my certs and connection by manually publishing a message on a topic with the same certs using:
mosquitto_pub --cert 75cb57542f-certificate.pem.crt --key 75cb57542f-private.pem.key --cafile AmazonRootCA1.pem -h a1ybm1dzxx22hk-ats.iot.us-west-2.amazonaws.com -p 8883 -t 'testing' -q 1 -m '{"message": "Hello World"}'

And I converted the crypto files with:
openssl rsa -inform PEM -outform DER -text -in 75cb57542f-private.pem.key -out private.der
openssl x509 -outform der -in 75cb57542f-certificate.pem.crt -out cert.der
openssl x509 -outform der -in AmazonRootCA1.pem -out ca.der

Board = Generic ESP8266 Module
Flash Frequency = 80 MHz
Upload Speed = 115200
Flash Size = 1MB (128KB SPIFFS)

Using an ESP-01 with 1MB FLASH