DYMO Mobile labeler
corny opened this issue · comments
Has anyone tested this software with the DYMO MobileLabeler via USB?
It is able to print labels of up to 24 mm width.
Hey @corny - not yet. But if you own one, we would be happy to have any report about compatibility.
If any problems regarding the setup, just read the documentation.
If any question remains, feel free to ask!
FWIW, I got it to work with a LabelManager 420P. I had to change the product ID in the code, from 0x1002 to 0x1004. (Also, in the USB rules, I had to change 0x1001 to 0x1003.)
The MobileLabeler seems very different, but perhaps with some luck, it'll work by just adjusting product IDs as well! :)
Hej, I'm interested in a Dymo LabelManager 280 , it looks like the interface is similar to the LabelManager 420P
, but I'd like to know if anyone got it working for real.
@computerlyrik I'd like to know for sure if I can get it working before buying it :/
I have a few mobilelabelers here, although so far they seem to have gone EOL before Dymo put out support in the form of an update to their linux driver/SDK. The included changelog only goes up to 1.3.0 (even though it's supposedly version 1.4.0.5) and the included document was "last revised 2012" but does mention the new version name.... It's a shitshow.
So far I can't find any official support for the MobileLabeler.
I've tested CUPS with printer-driver-dymo
from the raspbian repo, but regardless of the driver I select, it refuses to print anything.
lsusb (on Raspberry Pi 3B v1.3 running Raspbian Buster) is showing:
Bus 001 Device 007: ID 0922:1009 Dymo-CoStar Corp. DYMO MobileLabeler
Bus 001 Device 004: ID 0424:7800 Microchip Technology, Inc. (formerly SMSC)
Bus 001 Device 003: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
They straight up scrubbed the device from their website, although it's still available on the old version of the website on the Dutch locale.
[EDIT]
The old version on the dutch locale is now updated to reflect the international version where's it's scrubbed as well unfortunately.
Thanks so much for the info, @fssup!
For reference, with my LabelManager PnP (the supported printer), I get the following results with lsusb
:
Before modeswitch:
Bus 001 Device 014: ID 0922:1001 Dymo-CoStar Corp. LabelManager PnP
After modeswitch:
Bus 001 Device 013: ID 0922:1002 Dymo-CoStar Corp.
The relevant info here is that modeswitching results in the ID transitioning 0922:1001
→0922:1002
.
I'm no USB expert, but my best guess is that the odd Dymo product IDs correspond to storage mode, and even product IDs correspond to print mode. (For instance, @jpetazzo observed that the LabelManager 420P has 0922:1003
→0922:1004
.) By the way, @jpetazzo, did you get it working?
So @fssup, for your case my suspicion is that you have not yet performed the modeswitch, and you need to achieve 0922:1009
→0922:100a
. If that's the case, could you try following the instructions from the README regarding 91-dymo-labelmanager-pnp.rules
and dymo-labelmanager-pnp.conf
, but change all occurences of 1001
to 1009
and all occurences of 1002
to 100a
? If successful, lsusb
should look something like
Bus 001 Device ???: ID 0922:100a Dymo-CoStar Corp.