Program freezes when changing antenna input RSP2

[Marlboroman111]

Hey, I am just a beginner, SoapySDR and Cubic are working, but sometimes.the output of Cubic fails, when I change frequency and when I change to the "High Z" port, the program freezes at all.

I tried several times, it happens again every time.

Someone experienced this too?

Thanks for help and for CubicSDR.

[Smiril]

Also on raspbian with hackrf one
Hardware: raspberry pi 4 8GB

freeze after freq input or change

the os stuck in a huge hung and must hard reset with power off