GUI Rx stats in charts and streams
pkpathak opened this issue · comments
Pathak, Pravin commented
Hi -
While using GUI, Tx stream stats work and I can run charts with Tx PPS. But port is also receiving traffic. Port HW stats and I see it in Dashboard Port stats.
But in charts or streams from dashboard, only Tx pps or Tx stats work. Rx stats are always 0. Too of charts shows it is receiving traffiic.
I also added another stream matching exact receive stream and also tried looping back same stream but Rx stats on Chart are always 0.
Thanks
Pravin
Egor Blagov commented
Do you use VLAN tags? Is the same info shown in trex TUI?
ср, 14 нояб. 2018 г., 23:06 pkpathak notifications@github.com:
… Hi -
While using GUI, Tx stream stats work and I can run charts with Tx PPS.
But port is also receiving traffic. Port HW stats and I see it in Dashboard
Port stats.
[image: image]
<https://user-images.githubusercontent.com/6738923/48495038-2519f380-e7fd-11e8-98ab-aa145f413102.png>
But in charts or streams from dashboard, only Tx pps or Tx stats work. Rx
stats are always 0. Too of charts shows it is receiving traffiic.
Thanks
Pravin
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#99>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aho7jRUPxIOj9WO9cuBis8-7nMcMDVwZks5uvD-VgaJpZM4YeDxs>
.
Egor Blagov commented
Hi, Pravin,
Please give any update on my questions, I guess it's not the GUI issue, it may be the issue on Driver/Firmware/Hardware level.
- Do you use VLAN tags when reproducing this issue.
- Have you checked that info from TUI, and what the info on Rx stats is shown there?
Thanks & regards,
Egor
Egor Blagov commented
Closed due to end-user inactivity.