The Problem wirt RTL8812BU
Noel2077 opened this issue · comments
Hello. Here are the Problems with RTL8812BU devices: Error-95 operation not supported. I would appreciate any Help. @cilynx
Here are the Commands i run for an dkms install.
kali commands for rtl88x2bu:
Kernel: 5.18.0 kali 2022.3 virtualbox
Device: TP-Link T3U AC1300 mini V1. (RTL8812BU).
running root terminal!
1: sudo apt update
2: sudo apt upgrade
3: sudo apt install -y dkms git bc
4: git clone https://github.com/cilynx/rtl88x2BU
5: cd rtl88x2BU
6: make
warning: make[1]: Entering directory '/usr/src/linux-headers-5.18.0-kali7-amd64'
warning: the compiler differs from the one used to build the kernel
The kernel was built by: gcc-11 (Debian 11.3.0-5) 11.3.0
You are using: gcc-11 (Debian 11.3.0-6) 11.3.0
at the end im getting:
Skipping BTF generation for /root/rtl88x2BU/88x2bu.ko due to unavailability of vmlinux
make[1]: Leaving directory '/usr/src/linux-headers-5.18.0-kali7-amd64'
7: sudo make install
is this the correct output?
install -p -m 644 88x2bu.ko /lib/modules/5.18.0-kali7-amd64/kernel/drivers/net/wireless/
/sbin/depmod -a 5.18.0-kali7-amd64
8: sudo reboot now
After installing i hit iwconfig and the following output is displayed:
unassociated Nickname:"WIFI@REALTEK"
Mode:Managed etc...
the T3U has 2.4 and 5.0 ghz and iwconfig shows only 2.4ghz.
when i try to set Monitor mode with airmon, it doesnt do anything. with "sudo iw wlan0 set monitor control" im getting:
command failed: operation not supported (-95)
I am not sure anyone ever used make install. Could you try to load your module using insmod first? After that, there is either a Debian package or the deploy.sh script.