       ____    __  __    __
  ____/ / /_  / /_/ /_  / /_
 / __  / __ \/ __/ __ \/ __/
/ /_/ / /_/ / /_/ /_/ / /_
\__,_/_.___/\__/_.___/\__/

🚀 dbt build tools

dbtbt is a collection of developer tools to make building (run & test) and deploying models easier.

Install

This package is not yet on PyPI and needs to be installed locally as a dev package.

Clone the Github repo: git clone git@github.com:calogica/dbtbt.git
Create a new Python venv
Navigate to the repo folder and install as a local dev package. pip install -e .

You should then be able to call dbtbt from anywhere in the Python venv created earlier. Note that dbt also needs to be installed in this venv.

dbtbt build

Use this to run and test your dbt models in your dev project.

It runs the following steps:

Run a full refresh of models in {target}
(Optionally) Run models incrementally in {target}
Run tests in {target}

Usage

usage: dbtbt build [-h] -m MODELS [MODELS ...]
    [-e EXCLUDE [EXCLUDE ...]] [-t {dev,prod}]
    [-w] [-r] [-i] [-d] [-p]
    [-u {dev,prod}] [-c CONFIG_FILE]

optional arguments:
  -h, --help            show this help message and exit
  -m MODELS [MODELS ...], --models MODELS [MODELS ...]
                        List of models to run, e.g. dim_my_dim_table fct_my_fact_table
  -e EXCLUDE [EXCLUDE ...], --exclude EXCLUDE [EXCLUDE ...]
                        List of models to exclude, e.g. dim_my_dim_table fct_my_fact_table
  -t {dev,prod}, --target {dev,prod}
                        Name of dbt target as specified in profiles.yml. If left blank, default
                        target (dev) will be used
  -w, --wap             If set, will deploy using Write-Audit-Publish approach, requires a
                        `*_audit` target
  -r, --rebuild         If set, will rebuild prod manifest
  -i, --incremental     If set, will also run models incrementally
  -d, --dry-run         If set, will print commands to screen only
  -p, --print-dry-run   If set, will print commands to screen only including the models affected
                        by --models
  -u {dev,prod}, --upstream-source {dev,prod}
                        If set to 'prod', will use prod manifest to build unselect upstream
                        models. When target is 'dev', 'prod' is the default upstream source.
  -c CONFIG_FILE, --config_file CONFIG_FILE

Examples

Let's build a new model called fct_my_model, which is a large fact model selecting from a large source table, stg_my_staging_model.

Build fct_my_model in dev using data in the dev project only

[dev.fct_my_model]

dbtbt build --models fct_my_model

Build fct_my_model and all of its upstream dependencies in dev using data in the dev project only

[++dev.stg_my_staging_model --> dev.fct_my_model]

dbtbt build --models +fct_my_model

Build fct_my_model and all of its upstream dependencies in dev using data in the dev project only but only print the commands that would be run, including a list of models affected by the model selector:

[++dev.stg_my_staging_model --> dev.fct_my_model]

dbtbt build --models +fct_my_model --dry-run

[++dev.stg_my_staging_model --> dev.fct_my_model]

dbtbt build --models +fct_my_model --print-dry-run

This will use dbt ls to list the affected models:

---------------------------------------------------------------------------------------------------
The following models would be affected by your model selection:
----------------------------------------------------------------------------------------------------
my_project.stg.stg_my_other_staging_model
my_project.stg.stg_my_staging_model
my_project.dw.fct_my_model
...

Build fct_my_model in dev using upstream data from the prod database. Note that we are not rebuilding the upstream dependencies, we're simply reading from their prod versions, unless they exist in dev (Note: this is new in dbt 0.19+).

[prod.stg_my_staging_model --> dev.fct_my_model]

dbtbt build --models fct_my_model --upstream-source prod

Build fct_my_model in dev using upstream data from the prod database and include an incremental run as well to test incremental load logic.

[prod.stg_my_staging_model --> dev.fct_my_model]

dbtbt build --models fct_my_model --upstream-source prod --incremental

Build stg_my_staging_model and fct_my_model in dev using upstream data from the prod database. So, both of these models will be built in dev, but fct_my_model will read from stg_my_staging_model in dev since it's part of the model selection. However, any upstream sources for stg_my_staging_model will come from prod if it does not exist in dev.

[prod.stg_my_other_staging_model --> dev.stg_my_staging_model --> dev.fct_my_model]

dbtbt build --models stg_my_staging_model fct_my_model --upstream-source prod

dbtbt deploy

Use this to deploy models that have recently been merged to main via pull request and need to deployed to your production environment - either because the structure of the model changed (add/remove columns) or because business logic changed requiring us to rebuild the table in production.

It runs the following steps:

Update dbt dependencies
(Optionally) Run a full refresh of models in {audit_target}
(Optionally) Run models incrementally in {audit_target}
(Optionally) Run tests in {audit_target}
Run a full refresh of models in {target}, excluding any models defined in {wap:exclude}

Usage:

usage: dbtbt deploy [-h] -m MODELS [MODELS ...]
        [-e EXCLUDE [EXCLUDE ...]] [-t {dev,prod}]
        [-w] [-r] [-i] [-d] [-p]
        [-u {dev,prod}] [-c CONFIG_FILE]

optional arguments:
  -h, --help            show this help message and exit
  -m MODELS [MODELS ...], --models MODELS [MODELS ...]
                        List of models to run, e.g. dim_my_dim_table fct_my_fact_table
  -e EXCLUDE [EXCLUDE ...], --exclude EXCLUDE [EXCLUDE ...]
                        List of models to exclude, e.g. dim_my_dim_table fct_my_fact_table
  -t {dev,prod}, --target {dev,prod}
                        Name of dbt target as specified in profiles.yml. If left blank, default target (dev) will be used
  -w, --wap             If set, will deploy using Write-Audit-Publish approach, requires a `*_audit` target
  -r, --rebuild         If set, will rebuild prod manifest
  -i, --incremental     If set, will also run models incrementally
  -d, --dry-run         If set, will print commands to screen only
  -p, --print-dry-run   If set, will print commands to screen only including the models affected by --models
  -u {dev,prod}, --upstream-source {dev,prod}
                        If set to 'prod', will use prod manifest to build unselect upstream models. When target is 'dev', 'prod' is the default
                        upstream source.
  -c CONFIG_FILE, --config_file CONFIG_FILE

Examples

Let's deploy a new model called fct_my_model, which is a large XA model selecting from a large fact table, stg_my_staging_model.

Deploy fct_my_model to prod

[prod.fct_my_model]

dbtbt deploy --models fct_my_model --target prod

Deploy fct_my_model to prod but only print the commands that would be run

[prod.fct_my_model]

dbtbt deploy --models fct_my_model --target prod --dry-run

Deploy fct_my_model to prod but only print the commands that would be run, including a list of models affected by the model selector

[prod.fct_my_model]

dbtbt deploy --models fct_my_model --target prod --dry-run

This will use dbt ls to list the affected models:

----------------------------------------------------------------------------------------------------
The following models would be affected by your model selection:
----------------------------------------------------------------------------------------------------
my_project.stg.stg_my_other_staging_model
my_project.stg.stg_my_staging_model
my_project.dw.fct_my_model
...

Deploy fct_my_model and all of its downstream dependencies to prod

[++dev.stg_my_staging_model --> dev.fct_my_model]

dbtbt deploy --models fct_my_model+ --target prod

Deploy stg_my_staging_model and fct_my_model in dev using upstream data from the prod database. This is useful to test a deploy before deploying to prod.

[prod.stg_my_other_staging_model --> dev.stg_my_staging_model --> dev.fct_my_model]

dbtbt deploy --models stg_my_staging_model fct_my_model --upstream-source prod

calogica / dbtbt

🚀 dbt build tools

Install

dbtbt build

Usage

Examples

dbtbt deploy

Examples

About

Languages