TonY is a framework to natively run deep learning jobs on Apache Hadoop. It currently supports TensorFlow and PyTorch. TonY enables running either single node or distributed training as a Hadoop application. This native connector, together with other TonY features, aims to run machine learning jobs reliably and flexibly.
Compatibility Notes
It is recommended to run TonY with Hadoop 3.1.1 and above. TonY itself is compatible with Hadoop 2.9.1(https://hadoop.apache.org/docs/r2.9.1/) and above. If you need GPU isolation from TonY, you need Hadoop 3.1.0 or higher.
Build
How to build
TonY is built using Gradle. To build TonY, run:
./gradlew build
This will automatically run tests, if want to build without running tests, run:
./gradlew build -x test
The jar required to run TonY will be located in ./tony-cli/build/libs/
.
Usage
TonY is a Java library, so it is as simple as running a Java program. There are two ways to launch your deep learning jobs with TonY:
- Use Docker container.
- Use a zipped Python virtual environment.
Use a Docker container
Note that this requires you have a properly configured Hadoop cluster with Docker support. Check this documentation if you are unsure how to set it up. Assuming you have properly set up your Hadoop cluster with Docker container runtime, you should have already built a proper Docker image with required Hadoop configurations. The next thing you need is to install your Python dependencies inside your Docker image - TensorFlow or PyTorch.
Below is a folder structure of what you need to launch the job:
MyJob/
> src/
> models/
mnist_distributed.py
tony.xml
tony-cli-0.1.5-all.jar
The src/
folder would contain all your training script. The tony.xml
is used to config your training job. Specifically for using Docker as the container runtime, your configuration should be similar to something below:
$ cat MyJob/tony.xml
<configuration>
<property>
<name>tony.worker.instances</name>
<value>4</value>
</property>
<property>
<name>tony.worker.memory</name>
<value>4g</value>
</property>
<property>
<name>tony.worker.gpus</name>
<value>1</value>
</property>
<property>
<name>tony.ps.memory</name>
<value>3g</value>
</property>
<property>
<name>tony.application.docker.enabled</name>
<value>true</value>
</property>
<property>
<name>tony.application.docker.image</name>
<value>YOUR_DOCKER_IMAGE_NAME</value>
</property>
</configuration>
For a full list of configurations, please see the wiki.
Now you're ready to launch your job:
$ java -cp "`hadoop classpath --glob`:MyJob/*:MyJob/" \
com.linkedin.tony.cli.ClusterSubmitter \
-executes models/mnist_distributed.py \
-task_params '--input_dir /path/to/hdfs/input --output_dir /path/to/hdfs/output' \
-src_dir src \
-python_binary_path /home/user_name/python_virtual_env/bin/python
Use a zipped Python virtual environment
The difference between this approach and the one with Docker is
- You don't need to set up your Hadoop cluster with Docker support.
- There is no requirement on a Docker image registry.
As you know, nothing comes for free. If you don't want to bother setting your cluster with Docker support, you'd need to prepare a zipped virtual environment for your job and your cluster should have the same OS version as the computer which builds the Python virtual environment.
Python virtual environment in a zip
$ unzip -Z1 my-venv.zip | head -n 10
Python/
Python/bin/
Python/bin/rst2xml.py
Python/bin/wheel
Python/bin/rst2html5.py
Python/bin/rst2odt.py
Python/bin/rst2s5.py
Python/bin/pip2.7
Python/bin/saved_model_cli
Python/bin/rst2pseudoxml.pyc
TonY jar and tony.xml
MyJob/
> src/
> models/
mnist_distributed.py
tony.xml
tony-cli-0.1.5-all.jar
my-venv.zip # The additional file you need.
A similar tony.xml
but without Docker related configurations:
$ cat tony/tony.xml
<configuration>
<property>
<name>tony.worker.instances</name>
<value>4</value>
</property>
<property>
<name>tony.worker.memory</name>
<value>4g</value>
</property>
<property>
<name>tony.worker.gpus</name>
<value>1</value>
</property>
<property>
<name>tony.ps.memory</name>
<value>3g</value>
</property>
</configuration>
Then you can launch your job:
$ java -cp "`hadoop classpath --glob`:MyJob/*:MyJob" \
com.linkedin.tony.cli.ClusterSubmitter \
-executes models/mnist_distributed.py \ # relative path to the src directory.
-task_params '--input_dir /path/to/hdfs/input --output_dir /path/to/hdfs/output \
-python_venv my-venv.zip \
-python_binary_path Python/bin/python \ # relative path to the Python binary inside the my-venv.zip
-src_dir src
TonY arguments
The command line arguments are as follows:
Name | Required? | Example | Meaning |
---|---|---|---|
executes | yes | --executes model/mnist.py | Location to the entry point of your training code. |
src_dir | yes | --src src/ | Specifies the name of the root directory locally which contains all of your python model source code. This directory will be copied to all worker node. |
task_params | no | --input_dir /hdfs/input --output_dir /hdfs/output | The command line arguments which will be passed to your entry point |
python_venv | no | --python_venv venv.zip | Path to the zipped local Python virtual environment |
python_binary_path | no | --python_binary_path Python/bin/python | Used together with python_venv, describes the relative path in your python virtual environment which contains the python binary, or an absolute path to use a python binary already installed on all worker nodes |
shell_env | no | --shel_env LD_LIBRARY_PATH=/usr/local/lib64/ | Specifies key-value pairs for environment variables which will be set in your python worker/ps processes. |
conf_file | no | --conf_file tony-local.xml | Location of a TonY configuration file. |
conf | no | --conf tony.application.security.enabled=false | Override configurations from your configuration file via command line |
TonY configurations
There are multiple ways to specify configurations for your TonY job. As above, you can create an XML file called tony.xml
and add its parent directory to your java classpath.
Alternatively, you can pass -conf_file <name_of_conf_file>
to the java command line if you have a file not named tony.xml
containing your configurations. (As before, the parent directory of this file must be added to the java classpath.)
If you wish to override configurations from your configuration file via command line, you can do so by passing -conf <tony.conf.key>=<tony.conf.value>
argument pairs on the command line.
Please check our wiki for all TonY configurations and their default values.
TonY Examples
Below are examples to run distributed deep learning jobs with TonY:
FAQ
-
My tensorflow process hangs with
2018-09-13 03:02:31.538790: E tensorflow/core/distributed_runtime/master.cc:272] CreateSession failed because worker /job:worker/replica:0/task:0 returned error: Unavailable: OS Error INFO:tensorflow:An error was raised while a session was being created. This may be due to a preemption of a connected worker or parameter server. A new session will be created. Error: OS Error INFO:tensorflow:Graph was finalized. 2018-09-13 03:03:33.792490: I tensorflow/core/distributed_runtime/master_session.cc:1150] Start master session ea811198d338cc1d with config: INFO:tensorflow:Waiting for model to be ready. Ready_for_local_init_op: Variables not initialized: conv1/Variable, conv1/Variable_1, conv2/Variable, conv2/Variable_1, fc1/Variable, fc1/Variable_1, fc2/Variable, fc2/Variable_1, global_step, adam_optimizer/beta1_power, adam_optimizer/beta2_power, conv1/Variable/Adam, conv1/Variable/Adam_1, conv1/Variable_1/Adam, conv1/Variable_1/Adam_1, conv2/Variable/Adam, conv2/Variable/Adam_1, conv2/Variable_1/Adam, conv2/Variable_1/Adam_1, fc1/Variable/Adam, fc1/Variable/Adam_1, fc1/Variable_1/Adam, fc1/Variable_1/Adam_1, fc2/Variable/Adam, fc2/Variable/Adam_1, fc2/Variable_1/Adam, fc2/Variable_1/Adam_1, ready: None
Why?
Try adding the path to your libjvm.so shared library to your LD_LIBRARY_PATH environment variable for your workers. See above for an example.
-
How do I configure arbitrary TensorFlow job types?
Please see the wiki on TensorFlow task configuration for details.