Sailplane club oriented DIY proximity awareness system.
- Community based open-source. Pull requests friendly
- 2-way raw data bridge between 868/915 MHz radio band and Bluetooth / Wi-Fi
- All focus is on a standalone, battery powered, compatible proximity awareness device for club-environments
- Open Glider Network, P3I & FANET+ - Fully supported
- FLARM Air v6 (LegacY) - Minimal on-board capability, requires additional software on the Android
- ADS-B 1099ES & 978 UAV - Requires additional hardware
- GDL90,
- XCSoar - All versions, but special pull request required for FLARM support.
- LK8000 - All version, no additional FLARM support
- PilotAware
- Skytraxx
It's really not hard. And some board supplier have already installed a firmware version of SoftRF that can be upgraded to ClubRF
- TTGO T-Beam ESP32 board (must be appropriate for your region 433/868/915mhz)
- Larger/better Antenna
- An 18650 LiPo Battery source locally is best
- Simple Case least material
- Build/Install the firmware
You can order it fully built and delivered here...
Adds the ability to use the device without having to connect to software.
To the above add;
This is based on another populare DIY proximity awareness project. There's tons more great information on that reprository. This project is focussed on Soaring Club solutions and commited to staying community sourced.