OS X Docker Beta compatibility
rmtsrc opened this issue Β· comments
Are there any plans to update this to work with the new OS X Docker Beta?
As I'm running into the same issue where shared OS X volumes/mounts having slow file I/O and watch scripts don't work unless they are set to poll all of the files π
I haven't had a chance to use Docker Beta yet. Isn't it using something other than VirtualBox as the VM? If so, does that VM still have the same issues with volume mounting performance and file watchers not working?
@brikis98 Docker for Mac runs on xhyve
and osxfs
. Its native performance was nowhere near vboxfs
when I tested it at Beta 9. I might test again with the latest.
Wait, so it's even slower than vboxfs? That's quite an accomplishment :)
If anyone has it installed and can do a mini benchmark comparing native file system performance versus a volume mounted with Docker for Mac, that would be very helpful. I had been hoping the Docker apps would remove the need for docker-osx-dev, but if those apps are still unusable, then we'll have to update this script to work with them.
Yes, it was at the stage of Beta 9. I tested it with one of our not-so-loaded RoR apps where we don't use docker-osx-dev
, because the speed is fine. You could notice the speed difference without benchmark, but it's also backed up by the guys who have actually benchmarked it.
The thing is though, that on xhyve
they can improve significantly and I know they're after the performance. I'd actually expect the latest beta to be better than vboxfs
already.
Ah, OK. Well, if you've got a chance to benchmark the latest version, let me know how it works for you.
This is from one of the forum issues.
https://forums.docker.com/t/file-access-in-mounted-volumes-extremely-slow-cpu-bound/8076/69
Docker for Mac: version: v1.11.1-beta14.5.m
OS X: version 10.11.1 (build: 15B42)
logs: /tmp/20160607-093828.tar.gz
failure: No error was detected
--- local
root@9e5d52471dc9:/tmp# dd if=/dev/zero of=test.dat bs=1024 count=100000
100000+0 records in
100000+0 records out
102400000 bytes (102 MB) copied, 0.49442 s, 207 MB/s
--- mounted
root@9e5d52471dc9:/mounted/folder# dd if=/dev/zero of=test.dat bs=1024 count=100000
100000+0 records in
100000+0 records out
102400000 bytes (102 MB) copied, 39.3927 s, 2.6 MB/s
@gcstang Thanks for the link. Sounds like the perf problems are pretty severe, but the Docker team is working on it:
Just an update here from the Docker camp...
We're still working on it! We've added some small performance boosts over the last few Beta's and performance is heading in the right direction. There are a few other fixes that should be heading in over the next few betas that will also provide a decent boost. The target is to be much faster than VirtualBox and we're confident we can do this before release.
Looks like Beta13 made some significant leaps, though it's still painfully slow. Hopefully, future version will keep getting better and better, though I find it odd that they would release these "native" apps in what I would consider a totally unusable state...
Agreed, they said the release yesterday was an RC 2 instead of beta ...
hope they're still working on it.
On Tue, Jun 21, 2016 at 11:15 AM, Yevgeniy Brikman <notifications@github.com
wrote:
@gcstang https://github.com/gcstang Thanks for the link. Sounds like
the perf problems are pretty severe, but the Docker team is working on it:Just an update here from the Docker camp...
We're still working on it! We've added some small performance boosts over
the last few Beta's and performance is heading in the right direction.
There are a few other fixes that should be heading in over the next few
betas that will also provide a decent boost. The target is to be much
faster than VirtualBox and we're confident we can do this before release.Looks like Beta13 made some significant leaps, though it's still painfully
slow. Hopefully, future version will keep getting better and better, though
I find it odd that they would release these "native" apps in what I would
consider a totally unusable state...β
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#191 (comment),
or mute the thread
https://github.com/notifications/unsubscribe/ADBkKQ5Qdt9j-PEOknsg22NkixVIpW1Hks5qOA46gaJpZM4I0S-y
.
I suspect it could be a long time before we see decent performance from Docker for Mac. Watching this thread in case anyone gets docker-osx-dev running on D4M.
As far as I can see, it works better with the beta16.
Since Mac Docker now has a public beta I thought I'd try rebenchmarking.
Here's my results, I guess I'll stick with docker-osx-dev
for now.
Mac benchmark (without Docker)
dd if=/dev/zero of=/tmp/output bs=8k count=100k; rm -f /tmp/output
102400+0 records in
102400+0 records out
838860800 bytes transferred in 1.132447 secs (740750602 bytes/sec)
docker-osx-dev (revision ea0617d)
dd if=/dev/zero of=/usr/src/app/output bs=8k count=100k; rm -f /usr/src/app/output
app_1 | 102400+0 records in
app_1 | 102400+0 records out
app_1 | 838860800 bytes (839 MB) copied, 0.261691 s, 3.2 GB/s
Dinghy Docker over NFS (4.4.1)
dd if=/dev/zero of=/usr/src/app/output bs=8k count=100k; rm -f /usr/src/app/output
app_1 | 102400+0 records in
app_1 | 102400+0 records out
app_1 | 838860800 bytes (839 MB) copied, 26.5691 s, 31.6 MB/s
Mac Docker Public Beta (1.12.0-rc2-beta17 build: 9779)
dd if=/dev/zero of=/usr/src/app/output bs=8k count=100k; rm -f /usr/src/app/output
app_1 | 102400+0 records in
app_1 | 102400+0 records out
app_1 | 838860800 bytes (839 MB) copied, 34.3933 s, 24.4 MB/s
The above also matches my benchmark. Details at http://tekkie.flashbit.net/devops/docker-performance-on-mac