UDS programming sessions available on the Bench?? "ConditionsNotCorrect" (0x22)

Question

UDS programming sessions available on the Bench?? "ConditionsNotCorrect" (0x22)

MBTune opened this issue 2 years ago · comments

MBTune commented 2 years ago

Have a 18.1 ECU on the Bench, Can ID etc etc but when trying to enter a programming session getting the following..

Server refused our request for service DiagnosticSessionControl with code "ConditionsNotCorrect" (0x22)

Would this be due to missing Gateway etc???

Brian Ledbetter · Answer 1 · Mon Jul 25 2022 06:37:50 GMT+0800 (China Standard Time)

This is due to locked immobilizer. You need cluster and gateway or immo off / preconditions bypass patches in ASW.

…

On Sun, Jul 24, 2022 at 3:36 PM MBTune ***@***.***> wrote: Have a 18.1 ECU on the Bench, Can ID etc etc but when trying to enter a programming session getting the following.. *Server refused our request for service DiagnosticSessionControl with code "ConditionsNotCorrect" (0x22)* Would this be due to missing Gateway etc??? — Reply to this email directly, view it on GitHub <#61>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AABTO2JSFSJZ2YD2T5HCVHLVVXANPANCNFSM54QLCRTQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

MBTune · Answer 2 · Mon Jul 25 2022 06:45:01 GMT+0800 (China Standard Time)

Thank you, i guessed it would be IMMO/Gateway related, will see about doing ASW Patch if possible

Brian Ledbetter · Answer 3 · Thu Jul 28 2022 23:08:49 GMT+0800 (China Standard Time)

Closing this out -

to patch ASW to bypass IMMO, you also need a bench tool - since you can't flash ASW until immo is unlocked! I haven't found a way around this without opening the ECU.