Get ecu info not working (no connection)
DEN3535 opened this issue · comments
Hi!
Clone equipment based on ESP32S CP2102 TYPE-S
Everything works fine with Simontools.
Tiguan MQB 2.0 gen3 CHHB unit 5N0906259 / ECU HWN 06K907425B
VW_Flash can't work.
What could be the problem?
Running VW_Flash from Wine 10 x86
The ESP32 chip was flashing with different firmware!
So far nothing helps to establish a connection with the ECU!
I opened the hood of the car, washed the headlights, pumped up the wheels)
Please help me. Communication with the ecu is working!
What file do i need to unlock ecu?
Foto
!
Driver 0.9. The laptop only worked on windows 10 x64!
вт, 25 июл. 2023 г., 04:40 cube ***@***.***>:
… Hi! Clone equipment based on ESP32S CP2102 TYPE-S Everything works fine
with Simontools. Tiguan MQB 2.0 gen3 CHHB unit 5N0906259 / ECU HWN
06K907425B VW_Flash can't work. What could be the problem? Running VW_Flash
from Wine 10 x86 The ESP32 chip was flashing with different firmware! So
far nothing helps to establish a connection with the ECU! I opened the hood
of the car, washed the headlights, pumped up the wheels)
flash.log <https://github.com/bri3d/VW_Flash/files/12064926/flash.log>
flash_details.log
<https://github.com/bri3d/VW_Flash/files/12064927/flash_details.log>
udsoncan.log
<https://github.com/bri3d/VW_Flash/files/12064929/udsoncan.log>
Hi, I have the clone based on esp32s also, but get Ecu info doesn't even
work. How did you manage to make it work? which firmware did you flash?
Thanks
—
Reply to this email directly, view it on GitHub
<#103 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BBJ5WFUOJQQE5ESRGPHWDNTXR4PX7ANCNFSM6AAAAAA2MEI2AY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>