Counterpart of SIGNALDuino uC, it's the code for FHEM to work with the data received from the uC
| Device | Function |
|---|---|
| TCM97001,Logilink, Pearl NC, and similar,Lifetec LT3594 | Weather sensor |
| PT2262 and similar Devices | Remote switches like Intertechno V1+V3, Elro, door/window sensors |
| Conrad RSL | shutters |
| Oregon Scientific v2 and v3 Devices | Weather sensor |
| Oregon PIR sensor | motion sensor |
| Technoline TX3 | Weather sensor |
| Hama TS33C, Bresser Thermo/Hygro Sensor | Weather sensor |
| Arduino Sensor | multi purpose sensor based on arduino |
| technoline Weatherstation WS 6750/TX70DTH | Weather sensor and station |
| Remote sockets from serval brands | |
| CTW600 WH1080 | Weather station WH3080 UV/Lux Sensor |
| TFA 30.3209.02, 30.3208.0, 30.3200, 35.1140.01, 30.3221.02, 30.3222.02 | Weather sensors and stations |
| Visivon remote PT4450 | Remote control |
| Einhel - HS 434/6 | Garagedoor opener |
| FA21RF | Smoke detector |
| Mumbi m-FS300 | remote socket |
| s014/TCM/Conrad | Weather sensor |
| les led | Remote controlled led lamp |
| Livolo | Remote switches and sockets |
| Somfy RTS | Somfy blinds |
| Maverick | Wireless BBQ thermometer |
| FLAMINGO | Flamingo smoke detector |
| Dooya | Shutters and blinds from various vendors like Rohrmotor24 |
| Somfy RTS | Shutters from Somfy |
| Opus XT300 | Soil moisture sensor |
| Oregon NR868 | Motion sensor |
| Auriol IAN 60107, 114324, 275901, 283582, 297514 (Lidl) | Weatherstation |
| FreeTec PE-6946 | wireless bell |
| Elro DB200, KANGTAI, unitec | wireless bell |
| m-e VTX and BASIC | wireless bell |
| Pollin 551227 | wireless bell |
| TCM 234759 Tchibo | wireless bell |
| FT0073 | Weather sensors |
| revolt | Energy sensors |
| Clarus | remote power socket |
| WH2 | (TFA 30.3157 nur Temp, Hum = 255 -> nicht angezeigt) |
| TS-K108W11 | Doorbell |
| WS-7035, WS-7053, WS7054 | Temperature sensor 433MHz |
| WS-2000, WS-7000 | Series of various sensors |
| NC-3911, NC-3912 | Refrigerator thermometer |
| Tedsen SKX1xx, SKX2xx, SKX4xx, SKX6xx | Remote control |
| GEIGER GF0x01, GF0x02, GF0x03 | Remote control (compatible to Tedsen) |
| Techmar Garden Lights | Remote control |
The Perl modules can be loaded directly into your FHEM installation:
update all https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r34/controls_signalduino.txt
Prepare your Arduino nano. Look at http://www.fhemwiki.de/wiki/Datei:Fhemduino_schematic.png for hardware setup.
Connect the Arduino via USB to your FHEM Server and define the device with it's new port:
Example: define SDuino SIGNALduino /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0@57600
You have to adapt this to your environment.
If you made your setup with an Arduino Nano, you can use this command to load the firmware on your device: set SDuino flash
If this fails, you may need to install avrdude on your system.
On a raspberry pi it is done via sudo apt-get install avrdude
Look at the FHEM Wiki, for more Information: http://www.fhemwiki.de/wiki/SIGNALDuino Forum thread is at: http://forum.fhem.de/index.php/topic,38831.0.html