Giters

beagleboard / beaglebone-blue

BeagleBoard.org BeagleBone Blue - BeagleBone optimized for mobile robotics

Home Page:https://beagleboard.org/blue

Repository from Github https://github.combeagleboard/beaglebone-blueRepository from Github https://github.combeagleboard/beaglebone-blue

Wrong voltage on JST connectors ?

jadonk opened this issue · comments

commented

Migrated from jadonk#52
Originally created by @GDV0 on Sun, 07 Jul 2019 12:47:45 GMT

Hello,

Working with a Beaglebone Blue rev A2, I have measured 5V on UART and EQEP encoder connectors, which is not consistent with the 3V3 defined in the schematic.