camera-streamer web camera for Pi Camera Module 3 12MP on Raspberry PI was skipped because of an unmet condition check
kg117 opened this issue · comments
compile04032024.txt
As shown in the attached text file I have completed a manual install of camera-streamer.
The command: root@raspberrypi:/usr/local/bin# systemctl start camera-streamer-raspi-v3-12MP: Log:
root@raspberrypi:/usr/local/bin# journalctl -xef -u camera-streamer-raspi-v3-12MP
Mar 04 09:01:47 raspberrypi systemd[1]: camera-streamer-raspi-v3-12MP.service - camera-streamer web camera for Pi Camera Module 3 12MP on Raspberry PI was skipped because of an unmet condition check (ConditionPathExists=/sys/bus/i2c/drivers/imx708/10-001a/video4linux). ░░ Subject: A start job for unit camera-streamer-raspi-v3-12MP.service has finished successfully ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ A start job for unit camera-streamer-raspi-v3-12MP.service has finished successfully. ░░ ░░ The job identifier is 2190.
I am a beginner for Raspberry Pi. Your help would be much appreciated. I have looked at: /sys/bus/i2c/drivers/imx477/
While installing RPi 4B OS yesterday I don't remember configuring anything for I2C?
Kevin.
imx477 04032024.txt
The attached file shows where imx477 appears in the rpicam-apps Bug Report. Yet the log above shows:
ConditionPathExists=/sys/bus/i2c/drivers/imx708/10-001a/video4linux
which states imx708
My system only has: /sys/bus/i2c/drivers/imx477/ which is correct.
Please help. Kevin
Changed the name of camera-streamer-raspi-v3-12MP.service to camera-streamer,service and changed three references in camera-streamer,service file from imx708 to imx477 as I am using a HQ Camera. I was confused by the use of "V3" which does not appear in:
https://www.raspberrypi.com/documentation/computers/camera_software.html
V1 camera (OV5647) dtoverlay=ov5647
V2 camera (IMX219) dtoverlay=imx219
HQ camera (IMX477) dtoverlay=imx477
GS camera (IMX296) dtoverlay=imx296
Camera Module 3 (IMX708)dtoverlay=imx708
To call the last item "V3" is confusing. Sometimes it is called "CM3"?
I made the error of assuming HQ Camera was V3.
All my text files show everything output to the terminal.
Is my camera-streamer now complete?
Kevin.
http://192.168.0.15:8080/ please view files attached.
first page 06032024.txt
status page 06032024.txt
http://192.168.0.15:8080/snapshot
On windows 10 in Firefox "Server error" only item displayed.
Any suggestions please.
Kevin.
Arducam camera UC-A65 Rev B 12MP IMX708 model B0310 120°(H) wide-angle M12 Lens ribbon UC-376 on Raspberry Pi 4B
Camera-streamer works 100%
Many thanks
camera-streamer15052024.txt