Raspberry Pi Camera v1.3
Bersaker opened this issue · comments
Hi. I Have all tested.. but nothing works. is the raspberry pi v1.3 5M supported?
I got it working on bullseye, on bookworm it was working in libcamera but no signal in the camera-streamer
Same issue.
I'm using zero 2w with a V1 Pi camera, OctoPrint version: 1.10.1.
Currently, the only way is by using http://pizero.local/webcam/control to start streaming.
However, pizero.local/:8080/stream can't reach.
From the browser dev tool I found pizero.local/webcam/stream?_cb=1716623****** is working
I tried on Pi5 fresh install and edit the service file to camera-streamer-raspi-v1-5MP.service
Unlucky not working.
[Unit]
Description=camera-streamer web camera for Pi Camera v1.3 5MP on Raspberry PI
After=network.target
ConditionPathExists=/sys/bus/i2c/drivers/ov5647/6-0036/video4linux
[Service]
ExecStart=/usr/bin/camera-streamer
-camera-path=/base/axi/pcie@120000/rp1/i2c@88000/ov5647@36
-camera-type=libcamera
-camera-format=YUYV
-camera-width=2592 -camera-height=1944
-camera-fps=30
; use two memory buffers to optimise usage
-camera-nbufs=2
; the snapshot is 1438x1080
-camera-snapshot.height=1080
; the video/webrtc is 958x720
-camera-video.height=720
; the stream is 639x480
-camera-stream.height=480
; bump brightness slightly
-camera-options=brightness=0.1
--http-listen=0.0.0.0
--http-port=8080
-rtsp-port
DynamicUser=yes
SupplementaryGroups=video i2c
Restart=always
RestartSec=10
Nice=10
IOSchedulingClass=idle
IOSchedulingPriority=7
CPUWeight=20
AllowedCPUs=1-2
MemoryMax=250M
[Install]
WantedBy=multi-user.target
I also have a v1.3 camera working. RPi B+ v1 debian bullseye. Fortunately, I used the bullseye rpi image. Only because bookworm is not available for the early pi.