Introduction
This is the source code of the firmware used in the Attiny microcontroller that is part of the U:Kit sensor kit project.
Requirements
Software
In order to compile and flash the source code and do some modifications to it you will need
- AVR Assembler. Our recommendation is to use the assembler compiler coming with AVR Studio 6 or later
- AVR binutils. In Ubuntu 16.04 you can install them with the following command
sudo apt install binutils-avr
. - AVR Dude. In Ubuntu 16.04 you can install it with the following command
sudo apt install avrdude
.
Hardware
- AVR programmer. A cheap USBasp or similar will be perfectly enough. Make sure that you have the latest firmware flashed on the programmer.
Copyright
Copyright (c) 2016-2018, Slavey Karadzhov. All rights reserved.
Authors
- Cviatko Delchev cviatko@attachix.com - The biggest part of the code is done by him.
- Slavey Karadzhov slav@attachix.com - Documentation and small changes for the factory default reset.
- .. Contributors - See https://github.com/attachix/ukit-attiny-firmware/graphs/contributors
License
All files in this repository are licensed under GPLv2. See the LICENSE file details.