Not supported on new device
morenod opened this issue · comments
I have flashed all my old sensors with ZigBee firmware and all of them are ok.
I have just receive new ones, and after flashing with the ATC firmware, when trying to flash to ZigBee, I get this error
Log
15:46:57: Searching for devices
15:47:01: Connecting to: ATC_AD5B91
15:47:09: Hardware Revision String: B1.5
15:47:09: Software Revision String: V4.4
15:47:09: Firmware Revision String: github.com/pvvx
15:47:09: Detected custom Firmware
15:47:11: Hardware Version: LYWSD03MMC B1.5, Software Version: 4.4, Sensor: SHTC3 (SHTV3)
15:47:11: Custom config HEX string: 55051000002804a931318ab4
15:47:23: File: z03mmc.bin
15:47:23: File size: 130004 bytes
15:47:23: Count: 8126
15:47:26: Start DFU
15:47:31: Update error: NotSupportedError: GATT Error Unknown.
15:47:31: Disconnected.
15:47:48: Searching for devices
15:47:52: Connecting to: ATC_AD5B91
15:48:22: NetworkError: Connection Error: Connection attempt failed.
15:48:22: Reconnect 1 from 5
15:48:35: Hardware Revision String: B1.5
15:48:35: Software Revision String: V4.4
15:48:35: Firmware Revision String: github.com/pvvx
15:48:35: Detected custom Firmware
15:48:37: Hardware Version: LYWSD03MMC B1.5, Software Version: 4.4, Sensor: SHTC3 (SHTV3)
15:48:37: Custom config HEX string: 55051000002804a931318ab4
15:50:18: Start DFU
15:50:24: Update error: NotSupportedError: GATT Error Unknown.
15:50:24: Disconnected.
Do you anything to add this HW version to supported ones?
sorry, wrong repo