GATT Server is disconnected. Cannot retrieve services. (Re)connect first with `device.gatt.connect`. Detected custom Firmware
sander816 opened this issue · comments
any idea? I don;t know if i flashed this firmware or another version from somewhere else
15:05:16: Searching for devices
15:05:34: Connecting to: ATC_067765
15:05:42: NetworkError: Connection Error: Connection attempt failed.
15:05:42: Reconnect 1 from 5
15:05:49: Disconnected.
15:05:49: NetworkError: GATT Server is disconnected. Cannot retrieve services. (Re)connect first with device.gatt.connect
.
15:05:49: Reconnect 2 from 5
15:05:53: Detected custom Firmware
15:16:22: Disconnected.
Same problem here. Any advise? Thanks in advance.
Same problem on two brand new devices.
Same here with new devices. Mines got stuck after that and after removal/insert of battery ended bricked :(
Same here
Please also try it with a different device for example an Android device.
If that should also fail its possible to recover them via the wired flashing
https://github.com/atc1441/ATC_MiThermometer?tab=readme-ov-file#usb-to-uart
Please also try it with a different device for example an Android device.
If that should also fail its possible to recover them via the wired flashing
https://github.com/atc1441/ATC_MiThermometer?tab=readme-ov-file#usb-to-uart
I test W10 Edge and Android
The first device worked with the manual, second and third device i have the above situation.
Update: I test it again this morning over Android with Chrome Browser. After find the device and connecting, the connection not Interrupt and i can flash the zigbee image. After that i test it under W10 with Edge and it won't work. The first flash with custom firmware pass. After that the device lost connection after 2-3 seconds and is not flashable.