DESCRIPTION =========== F4Dev is a small (5x5 cm) development board for the STM32F4 microcontrollers, it contains a wide gamut of sensors and communications interfaces: + 10 DoF Inertial Measurement Unit (IMU) - Accelerometer (3 DoF) - Magnetometer (3 DoF) - Gyroscope (3 DoF) - Barometer (1 DoF) + Omnidirectional MEMS microphone + UART <-> BlueTooth + UART <-> USB + LED indicators + 6 pin JTAG connector (VDD, GND, TDI, TDO, TMS, TCK) + Pin breakout For an overview of the connections see connection.ods DEPENDENCIES ============ This work uses the latest official KiCad library available at: https://code.launchpad.net/~KiCad-lib-committers/KiCad/library This work also uses the footprint from libKiCad available at: https://github.com/JorgeAparicio/libKiCad These libraries and this work must be in the same path, as shown below: <someFolder> F4Dev F4Dev.pro F4Dev.sch F4Dev.brd ... libKiCad 3d footprint ... library (Official KiCad library) library module ... LICENSE ======= This work is licensed under the following license: Creative Commons Attribution-ShareAlike 3.0 Unported (CC-BY-SA 3.0) For more information see LICENSE.txt