Getting the library not working on Arduino Nano Every
arjen8888 opened this issue · comments
Hi,
I have installed the lastest Arduino development environment and I'm using just the SD library that comes as an example. I have the CardInfo example working with an Arduino Uno, but as the title says I'm not getting it working with the Arduino Nano Every.
I already posted some information with pictures on the Arduino Forum and another user suggested to ask here for if there could be a compatibility problem with the Every. Here the link to the topic on the Arduino Forum: https://forum.arduino.cc/t/sd-card-adapter-on-uno-working-on-nano-every-not-working/967609
I appreciate all tips and suggestions. If any other info is required then please let me know. Thanks for any help.
Arjen.
@arjen8888 I found this issue because I'm facing the same problem as you do. Did you find a way to solve it? Is it really code related?
@LukeDS-it No, I did not solve it yet. A bit frustrated I put the project away. I bought the standard Arduino Nano to give it a try but did not find the time do actually do it. I don't know what the problem is. My latest thoughts were the software because the hardware cannot be more simple. As you probably have read I got it working on the Arduino Uno so you might think by just replacing the board with the Nano Every* it should work. Could it be hardware? Would there be a hardware problem in the (original, no clone) Arduino Nano Every board? Could you please let me know the solution if you find it?
(* of course changed the target controller in the Arduino programming environment).